Life: Noods and Spoon

I’ve been pretty MIA from the real life S2k scene in SoCal. This past Tuesday I met up with some friends at Meiji Seimen in Costa Mesa. For people that don’t live in LA. I live in the LA area…. my friends live in OC. Going to OC is like driving to a different state for me. It’s like when I lived in Northern Virginia and I had to drive to Maryland, it was like that.

Foods
Met up with the dudes at Meiji Seimen. They are known for their Udon noodles. We were gonna meet at a Ramen shop, but that parking lot was tiny! so we moved on over to this spot.

Foods-2

They had some weird special, this is some Curry Udon thing I ate…… I should of just got their normal Udon soup honestly. I was hungry as hell so I ate it all.

With S2k ownership over the years, I notice a cycle. There is a group of owners, they own the car for a bit, then they sell it and pass it on to the next generation and then the next generation does the same thing and repeats the cycle. I am now noticing around me that this generation of S2k owners are selling their cars and are moving on to other things. I am a diehard, even though currently this generation of s2k ownership is changing, and new owners don’t care about the JDM goodies I lust for, I’m still in this for the long run, even if I have the means to buy a “better” car or newer car. Even then so, it’s the people that really make a community.

TuesdayNightOut

No stranger to the site, Areen’s Spoon S2k. He’s gone through a few changes since I last saw him over a year ago. That hood, looks familiar right…. He just switched back to the Spoon bumper after rocking an ASM 04 bumper for a bit.

TuesdayNightOut-2

ASM hood + Spoon Bumper. Another look immortalized in the internet for future s2k owners to visualize!

TuesdayNightOut-3

Another small change, Areen Painted the top half of his Super Expensive Mugen Dry CF Hardtop!!!!! crazyness.

TuesdayNightOut-5

I think he already had his ASM dual exhaust last time I saw him. I remember he waited a good amount of time for this.

TuesdayNightOut-4

Love how every came together in the rear. I wouldn’t change a thing….. Which brings me to another point. When people get to the pinnacle of their build and they have nothing else to do….. usually it goes a few ways. They either do a crazy overhaul, or they sell the car……. Or maybe keep it forever in this form? The later is what few do haha.

TuesdayNightOut-7

This is car life. Parking lot + BS.

TuesdayNightOut-6

Hope to go out to more car stuff, but life gets harder as you get older, especially when you add little human to your life.

Advertisements

Finds: 2018 TAS Spoon S2k for Auction!

Hi all,

Long time no post… It is 2018 and I’m still unemployed, so things are a bit slow for the s2k on my end! Don’t worry me and the S2k are in this till the end! I still gotta post up a picture of what I have left of the S2k….. In other news, my daughter was born this year, oh yeah! I don’t like to post too much non-original content, but I gotta archive this for the future. Links to stuff like this tend to die out.  If you like this non-original content, I do love posting S2k news….

This year during Tokyo Auto Salon, TAS for short, in parallel with the normal TAS activities, a car auction was held. Many classic JDM cars were presented and sold, such as a Mint Low mileage R34 GTR Nur, or the Spoon NSX, that Ichishima san famously crashed at the Macau street Circuit! But this is S2kandtheAnt! Even though I seem to feature non-S2k material from time to time, my priority is on this 2 door convertible with a 9k redline (sometimes 8200) that we all know and love!

At this years TAS, the Spoon Sports S2000 Racecar was auctioned off. Spoiler Alert, the car did not sell, it did not met the reserved set….. They did however release some juicy images of the spoon racecar. All these people building spoon tribute cars, nothing beats the real deal, nothing! This is a real treat, because it’s damn rare to see up close and super detailed photos of the car. For some reason most JDM tuners tend not to post pictures of their car like this.

SPOON_S2000_19
Vin # of the racecar shell.  Looks like it’s an Ap1, 130 model.  This is the 2003 year of the S2k in Japan, which is pretty much like a USDM AP2 minus the f22c engine.   With that being said, the designation of Ap2 vs Ap1 in Japan is only relevant with the later years that have a f22c and dbw, kind of like our 06+.

SPOON_S2000_17
This car was raced in the ST4 class of Super Taikyu (Super Endurance).  The rules for the class is basically showroom stock powered cars with minimal mods.  The engine bay of the car looks relatively stock with a few bit of spoon dress up items, brake sock, valve cover, radiator hose, radiator, snorkel duck thing.  The engine in this car is blue printed and built from spoon.  I believe spoon uses OEM parts when they rebuild their engines, but choose parts that are closer in weight to achieve total balance.  All of this is controlled by a Motec ECU.

SPOON_S2000_14
Interior is all racing business, spoon bucket, cool suit, and what’s a JDM car without Takata harnesses.

SPOON_S2000_12

SPOON_S2000_10
Aero is allowed in the ST4 class. Version 2 of the Spoon Sports S2000 Rear bumper with an interesting quad Spoon N1 Exhaust looking muffler tips.

SPOON_S2000_09
Spoon Wing, with the famous mooncraft Spoon hardtop.  The rear holes in the trunk are the fuel filler, so racecar!

SPOON_S2000_08
Under the trunk action.  Really made use of the area where the emergency tools are located for a fuel tank!

SPOON_S2000_05
Side profile showing off the Spoon S2000 widebody kit, but not really wide body kit because it is not running spoon fenders or rear over fenders!

SPOON_S2000_04
Dunno if it’s just me, but this version 2 kit only works on full liveried out racecars, when it’s on a car with a single color, it looks a bit odd.

SPOON_S2000_03

SPOON_S2000_02
Peaking under the Advan TCIII? rims you can see the signature Spoon Calipers.  These particular calipers might be a special prototype or the 355 version.  The picture is not clear enough to identify.

SPOON_S2000_01

Maybe not now, but in the future this will be worth something to a generation of enthusiasts.

Life: The Chronicles Year 8

Hey all,

I’m finally finishing catching up the events I went to a few months ago.  This should be the last of the posts for now…..I wanted to go to the Chronicles Year 8 meet for awhile now.  Reading about them on Joey’s blog when I was living on the East coast, it always painted me a good picture of the SoCal car scene.  I knew I couldn’t miss out this year, it helps to have car friends to go with too.


This meet just so happens to be when I was in the process of moving to my new place.  I had a bunch of stuff to move and only a few days to do it….. My wife was exciting to hear I was going to a car meet instead 🙂


I met up with a few friends in Pasadena before heading out to year 8.  Chilling in front of the infamous rival machine.

Gabe’s car just came out of the paint a few days prior…. The car is looking minty fresh with the battlecraft hood.


Joe was ready to lead the way.  Those MF10s are looking dangerously close to the curb in this picture… You can remember Joe’s car from this post

October 29, 2016-DSC02355
Following Joe to the meet.

October 29, 2016-DSC02358
My buddy Alvin snapped some shots on the road…..Endless brakes look so good with the Bronze Mugen MF10 rims.


Mugen hood, CR lip, works surprisingly well.

October 29, 2016-DSC02361
Some shots of the Rival Machine.

October 29, 2016-DSC02370
Alvin took a shot of me in traffic…..

October 29, 2016-DSC02373
We’re almost there…..


Of course, this being S2kandTheAnt….I met up with Areen and Chris….. they don’t need any introductions.


interesting pinstriping on the Enkei NT03 on the Rival Machine


626 Squad.


another angle of the 626 squad.


Spoon’s newly converted center-drive FD2 Honda Civic Type R was in attendance.  I even got to sit in it! In another life, this used to be 5Zigen’s FD2R in Japan.

S2k squad represent.

It was a hot hot hot day, I think it was close to 100 degrees this day, the crazy heat forced me to buy a spoon umbrella……yeah forced……


I thought these 24k gold engine bays have gone out of style, but it looks like it is still around.


Can’t get enough of this lineup…..


Cool styled NSX.


I loved this mugen kited DC2 Type R.


the Bronze Mugen MF10 looks great against the white.


The same Spoon Civic EG that was in my Spoon sports post.  Clean as always, rocking almost the catalog of spoon parts, but that damn Mishimoto radiator always gets me!  Link for the owner if he ever reads this.


I haven’t seen this in years, an Ap1 veilside lip.


Another picture of the S2000 Veilside lip.


This Mugen themed FD2 converted Civic looked great.


the only Evo ix at the show and it was a great example of one.


Rare Mugen FA5.  True story, I remember going to a dealership in 2009 and the salesman tried to sell me this car instead of the 2009 s2k I was looking at, he was working really hard at it, these cars must have been a hard sale at the time, no real power improvements that make a car cost $6k more….but now in hindsight, it might of been a good decision….


CDM as in Canadian Domestic Market Acura CSX…. with a supercharger and Itasha livery.


PY Integra Type R.


Hector Lavario‘s Voltex Theme S2k was looking good!


Either this in an imported car or a very authentic representation of an early D1 drift car.  I love the look, very nostalgic.


Chris popped his hood, and I couldn’t help  but to snap a picture.  Mugen intakes are my favorite…..


behind me was this swan-necked Suzuka blue s2k.


Rocking Voltex Styled Aero!  Overall this was well executed.  The red car next to this car was actually K swapped using Hasport mounts…. Update 4-10-2017….. this car was on a Smoking Tire One Take


A few Porches were in attendance.


ASM styled car with M racing mirrors.

And this closes it, from the garage, back to the garage…

Life: The day I meet Ichishima San! at Spoon Sports USA

Being in Southern California and being a car enthusiast is awesome! I can’t say that enough, I can see how you can eventually become jaded from the car overload…. I’ve been cutting down on car events to keep things fresh and we just bought a house, so we’ve been busy fixing it up. When I heard Ichishima san, the SPOON Sports CEO was going to be at GoTuning, aka Spoon Sports USA, I knew I couldn’t miss it. I’m not the biggest spoon fan, but I respect their philosophy, a minimal approach to car tuning, just slightly augmenting the factory fundamentals to retain total balance over outright power…..


The event was posted all over social media, Upon arrival at GoTuning, Ichishima was not there yet, but people were still rolling in, like this EK.  I’ve always like the body style of the EK. I remember a few years ago, my dad had an EG, EK, and EF at the same time, all hatchbacks.  He let me choose one for a daily driver, in the end I picked the EG since it was the most raw with a stick shift, hand crank windows, and no moonroof, and the EF was auto 😦


This brought out a lot of Spoon fans.  Like this beautiful Spoon’ed out EG.  He had almost the entire spoon catalogue on his car, but the damn Mishimoto radiator keep bothering me…….I love the blue and black theme.


Beautifully executed.


More cool cars were rolling in, like this Mugen themed EP3 with MF10s…. funny thing about MF10s, KingMotorsports just released a re-run of Mugen MF10 yesterday, everyone and their mother has been trying to sell their used set, probably hoping to buy a brand new in box set.  King lets you buy per wheels so those guys that bought 2 sets of NSX fitment wheels for the rear wheels for over $7k+ definitely got screwed!  I think the group buy is over now……..too rich for my blood.


Hector Lavario’s Voltex themed S2k with quality authentic parts.  I really like the Volk TE37s, beats the NT03s he had before!


Took a closer look at the EP3 running the Mugen kit.  Bronze MF10s on a silver car looks so right.


I like seeing properly modded EP3s, this chassis hasn’t seen too much love over the years compared to the other models.


MF10s with EP3 Type R Calipers.


My S2k…. got all sorts of cracks on my bumper and my hardtop is in horrible shape………Anyone want to sell me a daily?


Beautifully restored EG Civic.  I love color and the red anodizing on the CE28Ns.  I overheard heard the owner talk how almost every piece on the car is new….. like a modern day restomod.


Same ITR I shot at Tech Day awhile back….. He has an instagram too, I can’t remember it off the top of my head right now…….


Some of the GoTuning Featured line up.  Their famous center-drive Super lap battle FD2, full Spoon Ver.2 demo car with prototype Spoon open air concept hardtop, GoTuning Tommy’s ASM s2k, and of course Chris Lum’s famous Mugen Ap2.


Not in the same parking lot in front of GoTuning, I found this BB6 Prelude in the same complex.  The driver’s side door was bashed in.  This car definitely has some goodies though.  JDM full red interior, HID retrofits, JDM fogs, OEM lip kit, and running TL rims!  I used to have a 5th Gen BB6 back in the day.


The Calipers look like they’re off of another model, possibly late gen Accord?


Another angle of the featured GoTuning Lineup.


I know this has been around, but it was my first time seeing this in person. What is insane about the Spoon prototype hardtop is that the entire metal piece is CNC machined out of a single block.


Areen living up the Spoon life.


At this point Ichishima san rolled up in this BMW M5, Areen is hard at work assisting Ichishima San.


Not only does he have a sick Spoon/ASM themed S2k, he’s also really good at carrying stuff.


Ichishima San arrived and got to work.  Here he is signing Hector’s car.


Checking out the Spoon themed EG Civic.


Here is when he shook the steering wheel of the Spoon themed EG civic.  He remarked how loose the steering wheel is!  He mentioned that this is incredibly unsafe.  He went around that entire day shaking everyone’s steering wheel, including mine 🙂

November 19, 2016-IMG_0902
Chris getting his Spoon Steering wheel signed.

November 19, 2016-IMG_0906Chris’s all Mugen car.  I mentioned the car is all Mugen, and he said,  “he loves all Hondas!”


Checking out the EG civic and showing the owner of pictures of his own personal cars…… Nice Jordan IIIs btw….


People were trying to get everything signed this day.  I saw the most Spoon clusters Brand new in Box I’ve ever seen in my entire life getting signed, it’s crazy how much they go for nowadays…..

Next four pictures are shot by my buddy and talented photographer Nick aka NH512

NH1_4378

Myself, Ichishima, and Areen.

NH1_4391

I requested to sign my Spoon rear view mirror, inside of my hardtop, and an S2k Spoon Spark Plug cover.

NH1_4393

Ichishima san and I…. I didn’t know what to do with my arm here…..

NH1_4458

Closing it out with this picture….here I was getting ready to yell at Ichishima san for leaning on my friend’s car…..

Photoshoot: June 2016 Photoshoot!

Photoshoot: June 2016 Photoshoot!

Happy 4th of July everyone.  Last week Warren was back in town from South Korea so we decided to get together for a quick photoshoot!  It was getting late and we were not in the mood to move our cars 100000 times….. so this is a bunch of shots in different angles.  I lost a few shots because my camera was set on auto ISO on the tripod, the pictures weren’t up to my standards so they weren’t posted.


This line up of cars  is seen plenty of times if you are a frequent visitor of this site.  From the left to right, my car, Alan’s car, Areen’s car, Chris’s car, and Warren’s car

Chris Lum’s Mugen AP2 and Warren’s AP2 with the ASM V1 rear.

Warren’s Ap2 is also rocking an Authentic Amuse Dry Carbon Hood and Amuse R1 front bumper….. The Mugen hardtop Bronze CE28N and Stoptech brakes are a nice touch…. You can see the different types of S2000 hoods in this shot.  Of course, everything is authentic!





Chris’s clean Mugen Dry CF hood and Mugen intake.

Areen’s Carbon Fiber Spoon Spark plug cover signed by Mr. Spoon himself.  The battery setup is by KcMachine
Closing this photoshoot out with Areen’s Amuse’d Ap2.

Life: Nemo’s Garage Grand Opening Meet

Hi all.  Last week I checked out the Nemo’s Garage grand opening meet.  Nemo’s garage is located in Ontario, CA.  It was hot as hell that day, with temperatures in the upper 90s.


I rolled with my buddy Alvin in his LBP AP2

We found some parking off to the side….

There were plenty of civics there….

Like this K swapped RHD example

Of course, I was on the lookout for S2000s….. Like this Formula Red sitting on Advan RZ.

Instagram famous S2boost…. with J’s Fenders, Mugen Hardtop, J’s Racing rear quarter panel, and of course a Vortech supercharger……

Bronze TE37V and Spoon Calipers

My favorite civic there, and they were a lot of civics to choose from.  This is a clean and simple Spoon EG build with almost every spoon part thrown at it.

I don’t know much about CRXs, but this one looked like it had plenty of Mugen goodies……

I met up with my buddy Areen at the show and his Spoon’d out S2k.  He was parked next to a nicely executed Mugen theme S2000 CR in Apex Blue.

Apex blue just pops in person.  I love this entire build…..

Mugen Hood and Mugen MF10s!

He replaced the OEM hardtop with a Mugen piece.


Underneath the MF10s sits Endless Calipers…..Not many people run endless calipers, since they cost more than most of the Big Brake Kits out for the S2k

A better shot of the Mugen MF10 with Endless Calipers….

A caliper comparison, Areen’s Spoon Caliper setup with his brand new Project MU brake rotors.

My favorite cars at the meet for sure….

Areen’s Spoon Mirrors vs Mugen Blue mirror inserts.

Sleek and aerodynamic spoon mirrors…. not many S2ks can pull this off, doesn’t hurt when you have the full spoon kit.

I love how these look, they look much more blue than the spoon mirror inserts….and of course that mugen logo!

Here is Areen telling me about his 1 of 3 in the world J’s racing shiftknob and our crotches
Areen’s New ASM rear bar……Fresh off the boat from ASM.

Meet was not limited to Hondas, this mean FB RX-7 rolled by.

Or this 71′ datsun 240z

Two of Nemo Garage’s cars. their EM1 and EG….
Instagram S2k I follow, Mykeeeman.  Full J’s Racing exterior with some meaty ce28 and J’s racing 6pot calipers

The interior unfortunately was not as good as the exterior…. I’m sure he is still working on it. Looks look he has a cage with side bars, but the takata harness through the stock seats kills it for me. From a safety aspect it is unsafe and aesthetically, it looks bad.  All he really needs is seats and possibly a new center console cover.

Rear shot of the J’s racing rear bumper and J’s racing tow hook

J’s racing exhaust!

Another build I see on instragram, DPK ChuyChuy and his ITR

I love small details like this Fuji Speedway sticker on the lip….

First time really seeing a J swapped civic.  In real life it sticks out of the hood so much…..

Owner and his girl drive all the way from Vegas like this….. no hood and all….

Amazing how clean the engine fits in the engine bay

Stock bodied MKIV Supra rolling by..


I was suprised on the number of RHD Civics in attendance.  I felt like there were more RHD civics than LHD.
I love this clean look, lowered midori on CE28s in Titanium Silver.

Meet Life / Pickups: ASM bolts

I recently picked up some ASM bolts thanks to my friend Chris that brought them all the way from ASM in Japan.

IMG_6649
I took this picture during my visit to ASM I didn’t pick the bolts up when I visited for whatever reason. When I found out Chris was going to Japan, I jumped at the opportunity to get the ASM bolts to complete my cooling plate setup.

DSC05685

Before I get too much into that, meetlife!

DSC05687

I noticed that all authentic Mugen Carbon Fiber Hardtops Spot like this when there is some moisture in the air….. I’m assuming this is where they glue the hardtop together….

DSC05698-2

Nemo’s NA2 NSX was looking mighty fine. I like the DC5 Recaro seats! The car looks OEM, but the further you look into it, the more small details you can find….such as the Stop Tech trophy big brake kit.

Or this Science of Speed SuperCharger Kit….

DSC05701

I don’t know the exact numbers, but I do know that White NA2 NSX are extremely rare. Future classic for sure….

DSC05703-2

Where there is one White NA2…..There always seems to be another nearby. This one is going for an ARC Theme and was rocking a variety of ARC products….

DSC05705-2

I love the Comptech Strutbar. Not many of these around….

DSC05693

Had a stand off with Photographer Nick Hur

DSC05706-2

The fender extensions on Areen’s Spoon wide fenders

DSC05752

It was our Buddy Colin’s birthday. We all chipped in and got them this autoart NSX model as a gift for him since he is an NSX owner himself.

DSC05755-2

Sung checking out his new Oil pan with a Moroso baffle welded in. I feel like this is more affective than my alloy craft oil pan baffle that I have in my S2000

DSC05794

Fast forward a few days….Areen with his new wheel setup…. Volk Racing G25 in Prism Silver. The Color is insane, depending on the angle you are looking at the wheel, the color is constantly changing…. all a matter of perspective

DSC05793

The wheel was in the shadows, I had to bright it out of the darkness with lightroom……

Remember the picture at the top of this post…. Chris bought me back that exact bolt set…..

DSC05798

ASM License plate bolts!

DSC05789

And with that, this completes my cooling plate setup! I previously only had 2 Mugen bolts on my car…. the ASM bolts and the Mugen bolts look exactly the same, they are probably made at the same place.

DSC05790

Thanks Chris for the bolts!

Pick Ups: (Not Mine) Spoon Axle +Spoon Toe Arms

I’m lucky enough to have crazy friends with crazy taste that let me live vicariously through them, it is what sets them apart from a majority of other enthusiasts in my opinion. They are willing to take it to that extra degree that some others would think is superfluous and not a necessity.

My buddy Areen with his crazy Spoon’ed out S2000 picked up some parts for his car……

DSC05307

Legit Spoon Sports axles! How many of these are floating around in the USA?  I’m betting you these are the only ones in the USA…..

DSC05311

What makes these different than normal axles you say? Quoted from the Spoon EU Website….

“The importance of a reliable driveshaft is often overlooked in endurance racing to street applications. The standard Honda units do not lack strength themselves, the troubles and failure of the driveshafts are often the finishing quality. Slight pitting can occur on the contact surfaces, which under high heat deteriorate which then cause vibrations and failure.

The Spoon drive shafts are standard Honda units that have been disassembled then reworked and reassembled by Spoon technicians. Each contact surface has been polished and finished to exacting standards and then the components are matched during assembly to ensure the highest tolerances.

This ensures a smooth power delivery and reliable service ”

TLDR: Spoon takes the axles apart and micro polishes the bearings and repacked it with high quality grease…..

I blanked out the serial number because Areen paid good money for these and the last thing I want to see is the number being knocked off….

DSC05313

These would good perfect with some Spoon Axle Spacers

DSC05316

He Also picked up a SPOON REAR CONTROL ARM KIT….. Basically the Bump Steer kit for the S2k made by Spoon…. What sets these apart from other companies that have released the same type of component? These are made from Steel instead of aluminum, which makes these more reliable and stronger…..

DSC05317

DSC05319

Details like this is what sets his Spoon build apart from other Spoon builds….. He’s also a big fan of ASM, so the car will never really be a complete catalogue car…..

DSC05327

DSC05329

The new look with the Spoon over fenders installed and painted!

DSC05322

Speaking of insane enthusiasts with an eye for quality. Dallas have been building this VW Rabbit Diesel Truck…. I love how he added legit Volk CE28n to his build and an exhaust system that was worked on by none other than Hytech…..

DSC05325

Of course a shot of my car too! The undertray of my Amuse R1 Bumper is getting more and more scraped as the driveways in LA are angled very steep….

Life: Petersen Tech Day

I checked out the Japanese tech day meet at the Petersen recently. I was looking forward to this event for awhile now, I knew there was going to be some quality cars appearing and I couldn’t miss it….I’m going to try not to post so many car show posts since I feel like you can find the same content all over the net…..I rolled in with a few S2k friends this day…..

I was right behind Areen’s Spoon’ed out Ap2….. He got everything painted now, including his new spoon overfenders…..

Not pictured:Myself….. A few S2ks I rolled in with including some notable ones, like Areen’s Spoon’ed out S2k, Gotuning Tommy’s ASM’ed out S2k, and SasLari’s Spooned out S2k at the end…… The first blue car belongs to my friend Chris…he recently became famous for having his Forgestar F14 wheels blow up at ButtonWillow…. you can watch it here

Absolutely mint Mazda Cosmo…this is Concors level of excellent.
4 door hakosuka
It looks so good with the early morning sun….

Next to that 4door Hakosuka is this 2 door Red Hakosuka…. my friend was trying to buy one for the longest time, but apparently they are really hard to get registered in California….
The owner has owned this car for a long time now, I believe over 10+ years.  Datsun wheel!
Period stickers

In attendance was the fully MUGEN’ed out NSX seen all over the internet.  Seriously, there is probably only a handful of cars in the whole wide world that has the full Mugen kit like this guy….. didn’t get to take too many pictures of his car…. but he can be easily found with a quick google search.  My favorite Mugen piece of his car was this super rare Mugen Hatch that you could only get with the Mugen air cleaner….

Skyline R32 GTRs were in abundance at the show…..I feel like there were more Skyline R32 GTRs at the show than S2000.  This particular r32 GTR thought it was a ferrari….
Clean BMW E30 M3 some with some light mods….
IMG_9378

DSC05452

I like the Carbon fiber plenum on this BMW S14 Engine!

Interesting how most R32 GTRs were on DLR tags or registered out of state.
Datsun 510

This 240z with a RB26 and Greddy intake Manifold.


Datsun 240Zx were well represented

I didn’t really understand show cars until I came to California and saw the level of details on their show cars.  This EM1 is a prime example.  The more I look at this car, the more I see tiny details that could be easily overlooked.  Very nice Kswap with a Supercharger….

Mugen rims with Spoon Brake Calipers and ARC splitter…. this is what defines USDM JDM-type tuning…. just a mashup of all different types of brands.  In Japan, People usually tune within one brand or two….

A closer shot here detailing the engine bay.  I am digging the jblood spark cover.

More Mugen MF10 Action!
I remember back in the day I used to see so many of these on the road. Hell, my 2nd accident I ever had in my life was with a Black EM1 rear ending my car…. Finding a stock one of these cars must be impossible to find now.

Enter a caption

Insanely mint Honda Z600, it’s easy to forget how small cars used to be.  This thing looked like it just rolled off the assembly line….It looks like this is a Two Cylinder engine?

IMG_9479That Spare tire location.
Mitsubishi Evo IX 4G63 swapped into a Kouki S14

Not very common swap for this 240sx.
R34 GTR….All dirty, but still Bayside Blue!
Still clean body-wise nonetheless
this BMW “M” Coupe was in attendance……which is suspiciously rocking a normal Z front bumper, not the M version.
with normal Z3 Seats….not the M version either.
I’m positive this is not an M coupe….maybe the badge is from one….
Internet famous Michael Mao’s NSX was there….
I’m liking his new Wheel setup, ZE40s are the new hotness right now…future classic like the CE28

down the line from the NSX was this Skyline R34 Vspec…..
Looks like all was done was a drop, Volk TE37 and AP Racing Brake Calipers.

Voltex kitted Evo IX from Pholife33!
I’m digging the Illest Bride seats!

Red RWB 911!

signed by the master, nakai san.

Nissan Skyline R32 and Skyline R34

Another internet favorite, the famous Hakotruck
Very clean SR20 Engine bay

Enter a caption

Plenty of FRS’ in attendance, pretty much all of them were supercharged……Not really into these cars…..

AW11 Toyota MR2
IMG_9396
Supercharged 4AGZE

I wish Toyota would come back with such creative emblems.

Pretty good turn out for this event.
Whole row of 2nd Gen Celicas came out.


Enter a caption

This 2nd Gen Celica was sporting a 2JZGE non VVTI engine.  It was boosted as well!
Clean EF civics.
Legit Integra Type-r and Ap2 S2000
DSC05440
Phonix yellow ITR with desmond regamasters

DSC05438
Spoon Theme’d engine bay with a comptech icebox as an intake


Classic combination, NSX on Gold Volk CE28N



This R32 looked to have some nice upgrades, HKS Cam Gears, and probably an upgraded twin turbo setup

I wonder if these Nissan Skyline R32 enthusiasts will hold onto their cars. I feel like a majority of them are buying the car for the shear novelty of owning a skyline in the USA and to “Stand Out”. I think it’s a bid hard to set yourself apart from the crowd when there are more r32 Skylines at this show than S2000s or even Honda Civics….

My friend Alvin was digging this jacket haha

Porsche 918

Life: I showed up to the wrong party….

I’m a pretty unorganized person , for example, one time I booked a flight for the wrong week 3 months ahead and didn’t find out until I showed up to the airport and realized I was flying out 3 weeks later…… I don’t know how or why, but I thought the Petersen Japanese Car meetup was a week earlier than when it actually was.

Since I thought the meet was a week earlier than when it actually was, I washed my car a day and week too early….. I took a picture of my car fresh out of the car wash, I don’t go too crazy detailing, I usually take it to a DIY coin carwash place and spray down my car and dry with micro fiber towels, Costco micro fiber towels, only the best.  What you can’t really see is the crazy amount of scratches I have underneath my bumper for scraping the hell out of it all over LA……I can’t image what my subframe looks like, I’m sure it’s beat to death now since I’ve been force to daily the car recently…
I meet up with my buddy Alvin and gave him this Spoon Reservoir cover I got from Japan.  Honestly it looks a bit cheesy, something about that S in the spoon font…..  This  Evening he just got back from his first track day so he was super stoked.
The Car wash was Saturday night.  Sunday rolled around, I woke up fucking early, picked up Alvin, and off to what I thought was gonna be a JDM car meet.  Something was definitely going on at the Petersen since we got passed by a few cars on the road heading to the museum parking structure.  I thought it was funny that the cars that passed us were non-Japanese cars like this Mustang……This mustang was actually in front of us getting into the parking structure and was driven by Automotive Designer, Henrik Fisker, ex-ceo of Fisker Automotive.  This Mustang is a special edition designed by Fisker himself, I personally think it’s god awful ugly…..You can definitely bet after the show, I was waiting for this car to drive off and crash into something like most mustangs leaving car meets.

The meet is called the Petersen Breakfast cruise-in….. It is open to all makes and models. The Petersen provides free Coffee and Bagels to everyone that attends.  There was a good representation of Porsche air-cooled goodness.

Alvin thought the color on this car was rad, he told me it reminds him of butter.
C7 Corvette.

Enter a caption

Some dude showed up in a bikini top Miata, of course I didn’t get a picture of it.  The miata rocks a Maruha Timing cover, and a Kraftwerks SuperCharger.  He told me it puts down 240whp.  He tracks his car often and said his Tein EDFC active suspension system really helps rough tracks since the suspension auto adjusts itself to the condition while he is driving…. Suspension has sure come a long way.
Ferrari Testarossa goodness.
This Red and Black Ferrari Testarossa combo was pretty awesome.

Aston Martin DB7, these cars have aged well, it is still a stunner.
And where there is a Aston Martin DB7 there must be a Aston Martin DB8 near by!
I love how the weave of the carbon fiber meets in the middle.

I was not too sure what this was, I’m assuming it is some sort of rebodied Porsche…..
That is what gave me that clue.  I’m sure someone can chime in and let me know what this is.

Lotus 7, Caterham, Kit car, one of the above…..My Friend Chris with the Lotus runs the same Toyo R888 on his car in what looks like the same width….I wonder if it’s a Lotus thing.

A Lamborghini Diablo VT showed up like a boss.  Check out those exhaust pipes!
Another car that showed up like a boss was this Toyota Starlet.  I got a soft spot for well done starlets.  Even dudes in Ferraris were breaking their necks staring at this car.
Especially when they are rocking a 4AG that is carbed!
Clean Datsuns 240Z like this car are getting harder and harder to find.
All different types of cars showed up.

There was a whole crew of BMW Z8s that showed up.  Seeing one BMW Z8 is a treat in the wild, but seeing a whole row of them in different colors was something else. There was probably 9+ BMW Z8 in attendance.
The reason for the large BMW Z8 turnout is because Henrik Fisker was in attendance, who also designed this car….All the owners got their cars signed.
Like this particular BMW Z8 that is an extremely rare Alpina version.
I’m liking that Silver on Red!  Reminds me of a certain S2k 🙂

That guy with a grey cap is actually famous Youtubber Alejandro Salomon, aka Salomondrin. He’s an enthusists that drives and owns more than his fare share of exotic cars.

Like this Dodge Viper ACR!

I was really feeling the colors on this Ferrari, the blue calipers really stick out on this grey car and the HRE wheels really make it pop.

I’m a sucker for Red interiors, especially on white cars.  This Mercedes Benz 250SE is a proper cruiser.
Voltex wings on Nissan GTRs, so right.

The interior of the Diablo VT is fresh as hell…..

I feel like I’m getting jaded living in SoCal.  2 hellcats, a BMW M5, and a Mercedes Benz GT roll in and I wasn’t even excited……..

The event is only a few hours long, so people started rolling out…….

After the morning meet, we hung out at our friend Chris’s house.  He was assisting me correcting some fitment issues I had with my Ap2 taillights I installed years ago that was bothering me…..It is better now, but I feel like I need to find a better solution to make it even more flush.  Chris is a Mechanical Engineer by trade and he makes his old Custom wings for the S2000.  They are extremely secure and actually engineered and tested, unlike other brands…..*ahem battle aero*…… Check it out here

IMG_6860

He also helped me put on my H Badge sticker I bought from Japan. It covers the holes in the trunk left by my old emblem. I’m really bad at putting on stickers, I always end up getting air bubbles in them one way or another. I think it looks great, very Porsche GT3RS-esque.