Life: Chronicles Year 10

Hey all,

I am still alive…. Life has been busy, my daughter, new job in a new field, house stuff, etc…. adulting really takes a toll on you.  It’s funny when I tell my friends from highschool/college and mention I still have my s2k(partially) and I’m still into it, going to meets, writing blog posts, etc, they look at me like I’m a 30 year old going on 18.

I can’t shake this car thing, especially Honda S2000s, even though the scene is drastically different than when I first started.  Before I couldn’t fathom why the OG S2ks guys sold their cars and went on to different things, I would think why would you leave the greatest car god has ever created (JK not JK), but now as a fully grown man guy (I think), I finally understand, life changes and sometimes you don’t got time to drink boba and smoke cigarettes till 2am in the morning.  This younger crowd does make me think about the s2k as a platform….but I am in this for the long run…. we’ll see if this turns into 911 and the Ant.

Sorry for the long tangent…. I finally had time and approval from my boss, aka wife, to make it down to the Chronicles year 10 meet. In fact we just got off a cruise from Mexico that morning, I even made my wife, daughter, mother-in-law rush off the boat at 7am with all our luggage instead of having it delivered to the dock for us so I could make this meet. Which means our continuously screaming child was under her care for the day, while I bare the heat of beautiful Corona California…..  It was a hot one for sure, in fact every year is hot as fuck, so this year was no different.

Excuse the sensor dust… I tried my best to remove it.


Upon entering the meet, I had to say what’s up to Joe, lowkey one of the best builds out there.  He’s a super humble guy that doesn’t live for the gram like 75% of these owners nowadays.  His Mugen S2k CR is a thing of beauty and has been featured before.  I definitely look up to him, since he’s a great father and has this sick S2k, #lifegoals.


Next to Joe’s Mugen CR is Carlos’s ASM bumper S2000 CR, another S2k CR that has been “ruined” with Voltex rear over fenders and Mugen rims.


Sara Choi’s Voltex’ed S2000 CR.


EK with J’s Fenders


EG Civic with a rad Pocari Sweat livery, Osaka JDM wing, J’s racing fenders, and super jdm mismatching rims.


Jackie made it all the way from Vancouver Canada to make the meet. I’ve been following this build for years, before instagram when he just had a build thread on S2ki.  In fact I remember his car in this video back in the day. He had an 04 ASM bumper before.  Now he’s rocking a Voltex race front bumper, Voltex rear diffuser, spoon hood, craftsquare mirrors, and Voltex wing…. When he was rocking the ASM front bumper, the Voltex kit wasn’t even out yet, that’s how OG this guy is!


I love the Te37 wheels in this color.


Interior shot that shows the stack cluster.  I love the stack cluster, I actually prefer it over the S2k speedo.  Iconic Cusco blue rollcage and momo wheel with NSX-R horn button.


Another guy from Canada came down in this super clean styled Toyota Century.


I don’t even want to say VIP style, because this is the VIP.  When I think of VIP style, I think VIP cars are trying to make their car look and feel like this.


ITRs were plenty.


Sang ‘s  J’s Racing widebody turbo s2k looking good…. car for is for sale btw!


Gotuning tommy, representing Gotuning with his crazy ASM S2000 CR…. the 4th “ruined” S2000 CR at the meet.


For this event, Spoon USA brought out their Super Taikyu S2000 all the way from Japan.


Yep looks race car.


The Spoon Super Taikyu car rocking some Titan7 wheels with some 6 pot Spoon calipers.


Of course this isn’t s2kandtheant without talking about Areen’s S2k….. This is for sale too… My S2k friends’ s2ks are slowly disappearing.


Great deal if you buy it!


Since I am currently working on an EG civic, I was taking notes of all the EG civics there.


EG civic with Mugen lip, Mugen strut bar, and some green TE37.


What amazes me are these small details, like how clean this hood support is!


It is amazing how some of these cars were at wekfest in the bay area a bit prior to this event, and they all made it down to this meet.


Another shot of Jackie’s S2k.


This del sol was exceptionally done.  Mugen front bumper, Te37, K swap with Kinsler ITBs, and S2000 Spoon mirrors.


What impressed me the most are these recently discontinued crazy $$$ Mugen x Recaro MS-R seats.  You could buy many del sols for these price of these two seats.


Simple Amuse R1 front bumper S2000 with CE28n


Modest AP racing big brake kit on the s2k.


This Spoon civic that pops up at every big meet.  Pretty much everything from the Spoon catalogue except the mishimoto radiator.  I think I last saw it at Eibach in 2018.


My buddy Gabe with his Ap2 with an Ap1 front bumper.


Mugen MF10s up front and TE37 in the rear.


Joe popped his hood revealing the Mugen intake, super rare mugen spark plug cover, and ASM strut bar.


ITR with Mugen kit on some TE37.


This is by far my favorite EG Civic at the meet.  Super super clean JDM EG6 SIR.  Here you can see the super clean and rare EG6 Mugen exhaust.


This civic is perfect sitting on white Mugen MF8.


I love how pristine and stock the engine bay is. I love the OEM resonator and OEM airbox.  I find it funny how I’m coming full circle nowadays, where before I would want the most modded car, but now I want the most original car as these cars age.


Everything about this civic is perfect, sunroof visor, window visors, and yellow interior.


TSX wagon on Mugen MF10s with some more Mugen goodies.


Clean Ap1 rocking the Ap2 Mugen kit sitting on Mugen MF10.


Mugen kit goodness.


Clean r32 skyline in an interesting green color.


Pretty good turnout.


Lotus Elise on an APR kit


Front shot of the Super Taikyu Spoon S2000.


Another shot of Gotuning Tommy’s ASM s2k on Titan 7 wheels.


The Evasive booth had this Ap2 with the new Greddy Gen 2 turbo kit


Love the ASM tow hook peeking out of the Amuse R1 bumper.


shot of the Mugen ITR from earlier, The open hood reveals a K swap.


EG Tank Mike was present


Clean NA1 NSX with TE37.


Quad tipped Spoon exhaust.


Spoon prototype hardtop.  It’s amazing looking at the hardtop in detail, it is CNC’ed out of one piece of metal.


Super clean EF, I’ve been really interested in EFs lately… something about those boxy looks.


Under the hood of the Spoon Super Taikyu S2000….


Sang’s S2k again.


S2000 with wings out in full force.


Super clean ARC theme BB4 prelude.


Engine shot of the ARC theme’ed prelude.


Youtube famous LATOMMYLA TWM ITB EK civic.


shot of the TWM ITBs.


EK is on green TE37.


At the point I changed lenses that had a super scratched polarizer on it….. I didn’t realize this till later.  That’s why all the picture from here on out seem a bit hazy.


Jackie’s S2000 again showing his AP Racing pro 5000 calipers in detail.


Notched authentic Spoon hood for the turbo.


under the hood of Tommy’s car, showing off the ASM intake and Mugen Spark plug cover, and ASM dry CF hood.


Areen’s ASM hood…. looks familiar :p

Closing out this post with Phil Robles crazy Eg civic.  2019 just started, hopefully we’ll see my S2k get one step closer to a car again!

Advertisements

Life: Petersen Museum Japanese Cruise-In & Super Street Meet 2018 Part 2

We’re back with part II of of my Petersen Museum X Super Street Meet coverage! Please see here for my prior coverage.

DA Integra with Speed Star Racing by SSR EX-C aero covers…. try finding these nowadays.  I would hate to lose a center cap.


Dat JDM parking sensor.


A GTR with a bunch of overtake parts on it.  For those who don’t know Overtake is an in house brand by bulletproof automotive, some of their parts are made by companies such as Power House Amuse, makes sense since they are the official US Powerhouse Amuse distributor.


R33 GTR owned by Kinganytime of Hoonigan fame? Not sure if he’s a part of them anymore.


Red Cressida also featured on Hoonigan


Evo IX from DTM autobody rocking the full Voltex kit.


Love when other makes rock ASM parts.  This is very common in Japan since ASM is the Recaro dealer and outfits many of their seats into cars, i.e Porsche 911.


DanOften’s Ap1 with voltex bumper, spoon hood, and craftsquare mirrors.


Pretty serious seat setup.  Hopefully this car actually sees track time.


First gen civic with a Honda motorcycle engine.


Not sure what motorcycle this is from, I’m sure I would of found out if I read the paper above…


The wheels look like Watanabes, could be wrong…..


CHP rollin by making sure everyone is staying CARB legal.


Super Clean Civic VTi.  The  EG Civic VTi is kinda of like the SIR model but for the UK market, it comes with a B16a.  It doesn’t have the white SIR cluster, but does have red gauge needles, and a tach that goes to 8k and reads in miles.  No idea why I didn’t take more pictures but I thought it was pretty cool… Makes sense to import cars from the UK since cars are being exported from Japan at an alarming rate.


My friend Alvin was drooling over this AW11 MR2.


We decided to go downstairs into the Petersen museum since the meet was pretty small…. Out in the parking area they had this E30 M3 on display.


Inside the Petsersen Museum, out front and center, they had this Porsche 911 993 GT1 Race car on display.


Forshadowing the Porsche exhibit in the museum.


Amazing rear end, the exhaust setup looks insane.


I really like the overall shape of this car, it is very elegant.


They also had Iconic vintage Japanese sports cars out front as part of their Japanese car exhibit.  Super Rad Honda S800, grandfather to the almighty S2000.


A Subaru 360… kinda like a jdm volkswagen beetle knock off.  To the left of the Subaru is a Toyota Sports 800, which also rocks a boxer engine.  You could say this is the grandfather to the current GT86.


Finally some more S2k content, and a very historic one in fact.  Most people remember Suki’s VeilSide S2000 from 2 Fast 2 Furious….  Did you know she is Steve Aoki’s sister?  And their father is the founder of benihana….. now you knowwwwww.  I can’t remember the last time anyone mentioned ROJA wheels… throwback.


Interior is pretty standard, mostly reupholstered and the addition of gauges in the center.


The Time Machine Delorean from Back to The Future.


One of a kind Toyota 2000GT Convertible custom made for Sean Connery in the film You Only Live Twice because he was too tall….


I saw a few of these at the old Toyota Museum, which is long gone now.


Mazda FD RX7 prototype.


Mclaren 720S entirely made out of Legos.


Jaguar XJ220


Kenmeri Skyline


Famous Super Street ex-editor JDMWong’s EF Civic painted Suzuka Blue with a Rocket Bunny Kit…. funny how those two are not things I like in my book, but work soooo good here.


SSR SuperFins.


Close up shot of the superfins.


Incredibly rare Mugen Exhaust for the EF.


Dragcartel K series engine up on display.


With a mean looking header.


A Titan Motorsports Supra.  Titan motorsports is a shop famously known for tuning Supras.


Classic and new Ford GT.


Period looking Nissan Race car.  Reminds me of speed racer.


Amazing how minimalistic this car is.


Period correct zip ties holding everything together.


Mazda Cosmos.


Another Toyota 2000gt, this one more original.

Afterwards we went downstairs to check out the Porsche exhibit…. I don’t know my Porsches too well, so excuse my lack of knowledge.  This looks like a Porsche 911 930.


Yep, the 930 is a turbo…


I haven’t seen too many of these Porsche Carrera GTs in person up close.  This front bumper is where ASM found the inspiration for their bumper design.  You can see it right?


ASM may of found inspiration from the fenders too.


To my surprise, the interior looks very dated for a car of this prestige, typical early 2000s look…. You can’t see it, but something on the door card was coming apart on the passenger side.


Never a fan of tan interiors…


Porsche 911 Targa.


Porsche 356 speedster.


A more modern Porsche….


This car is the famous Rothmans Paris – Dakar Porsche 959.  I believe the dirt is original too… This must be worth a cool million dollars+.


Slantnose 911.


This car was double roped off, if that means anything.

I am going to end off this post with this Zenki 240sx on CP Hart-R wheels, I walked back into the show and took one shot and left….

Life: Petersen Museum Japanese Cruise-In & Super Street Meet 2018 Part 1

A month ago I went with some friends to check out the Petersen Japanese Cruise in / Super Street Meet in west LA. The last time I went was 2 years ago and the complex was packed with crazy cars, check my previous post here. This time unfortunately, there was a noticeable decline in attendance compared to 2 years ago, along with the quality of cars. My theory is that the first 2 years they did not charge a fee for showing a car, while this year they did, in addition when I went the first year, they provided free validation of parking, while this year I paid the full price of parking, I think this deterred a lot of people from coming.

I am still trying to figure out if I will go next year, I am currently more inclined not to go, due to what I saw this year.


The day started cool, but man it was getting hot and one hour in I was sweating hard.

Top Rank Importers had a strong showing, there was a large representation of RHD JDM vehicles showcasing what they have to offer.  With the 25+ year rule and all sorts of vehicles are now eligible to be imported to the USA, fly by night importing companies have popped up everywhere.  I’ve heard stories of people essentially exporting a crushed up JDM salvaged title car, only to be repainted and resold in the USA….. make sure you do your research….  tangent over.


Not many S2ks in attendance at this meet.  For whatever reason, I find myself attracted to these oddball cars.  For example, this mid 90s Toyota Camera on Volk Te37 SL.


I’m not a huge wheel guy, but I hope these are authentic.  If they are authentic, then this guy gets points for buying wheels that cost five times the price of the car.  Seriously, you can buy four 1995 Toyota Camrys for the price of one set of Volk Te37 SL.


Panda Toyota Supra on Volk TE37.


Rad to see a time attack Supra, I’m just going off of the banner though.


Another interesting car that caught my eye.  This late 90s early 2000s Toyota Corolla.  If you’re like me and grew up Asian in the 90s/early 2000s, EVERYONE had this car.  Your uncle, your friend, your teacher…. you had to have known someone that drove this car.  The Volk TE37 SL wheels caught my eye with this Corolla.


Inviting me to take a look closer to the engine bay.  I believe this is the XRS version, which offered the 2ZZ engine, the same engine that came in the Celica GTS of the same era.  Pretty cool, because you don’t see many of these around.  Toyota was doing really crazy shit during this period, I remember the first Scion TC had a supercharger option you could of got from the factory.  Nuts right?


I do like that TRD strut bar, something about TRD strut bars always look so beefy and functional, I dream of getting TRD chassis bars for my Lexus LS430 and IS300.  Man Toyota was really doing something during this time period, even my personal cars are Toyotas from this era.


The interior had these TRD Sport seats that I am sure are incredibly rare.  TRD generally have a very limited run when they release parts.  It’s not like Mugen that in comparison have a much longer window, for example the Mugen intake for the S2k is still available brand new and the S2k was discontinued almost 10 years ago!


This Nissan Skyline R32 GTR had it’s hood opened and something immediately caught my attention.


This Nismo RB26DETT NISMO FINE SPEC FINAL EDITION badge certifies this RB26Dett is a Nismo crate engine assembled at their fabled Omori Factory.  A quick google search shows this Long block is over $13k USD for the long block itself and limited to only 200 units.  As a Honda guy, I am jealous of the in house factory support Nismo gives their cars.  I mean how rad would it be to see a Final Spec Mugen F20/f22c…. one can only dream.


The special Nismo engine is paired with a Nismo Intake manifold and typical jdm goodies, a la HKS and Cusco.


For the wheels, this R32 GTR Skyline had huge Endless calipers and Volk ZE40 in bronze.


The Nissan Skyline showing was strong this day.  It was the most common car out there.


Hakosuka GTX.  Another car on my dream car list.


Period car next to some period correct old men.


Once again another Nissan R32 Skyline GTR.  I love the Castrol livery on this car, a throwback to the Group A days.


Frontal of the Castrol livery R32 Skyline.


NSX on Volk TE37

With Recaro SR3 seats.


Of course this is S2kandTheAnt, you need some S2k coverage!  This is the Super Street project Ap1 S2000 they built within a week.  It features the prototype of the new Greddy Turbo Kit Gen 2 with a more modern Garrett GTX turbo, improved exhaust manifold, more power, and still smog legal!  I never really understood the plight of California residents until I became one, having a smog legal upgrade really saves you some headaches.


I previously shot some photos of this kit at Eibach this year.


This project features the new Seibon dry carbon trunk…… which is typically seibon quality.  I mean look at that gap between the tail light and the trunk!  This most definitely is not ASM quality.


The Super Street project ap1 setting on Konig wheels.


Levin with some carbs.


Ending off the post with this DA Integra with Speed Star Racing by SSR EX-C aero covers in super mint condition.  This is a great period correct build! See you guys later for part II.

Life: Eibach 2018 at AutoClub Speedway Part 3

Final post of Eibach 2018 at autoclub speedway! I’ve noticed something with my pictures I need to take more into account when I’m going over them….  My pictures look drastically different my iPhones (yes mine and my wife) compared to what I see on both my Mac Pro Desktop and Macbook even though I thought I calibrated them….

Check out my previous post here if you pissed it.

On to the pictures!  At this point I was done checking out the cars in S2k row and started to venture out to the vendor area.  An overcast arrived that was greatly welcomed, so being not so hot AF I really took my time…


Always a classic S2k look for me, Powerhouse Amuse R1 bumper and bronze wheels, in this case Mugen MF10 (I do wish they were CE28N) and a black OEM hardtop.  This white car was also rocking spoon aero mirrors…. I still don’t know how I feel about the aero mirrors since I’ve re-fell in love with stock mirrors recently haha.  I’ll probably change my mind about that in a few weeks, as I always do.


I do miss my Amue R1 bumper…..


This new gen NSX came fresh off the drag strip.  It ran a stupid fast time….I just can’t remember what it was…. thrilling I know.  I believe it only has exhaust modifications done to the car.


Not really a looker this one…. It would be a half decent build if it wasn’t for those awful headlights.  Some mods really detract from the car, for example, for me at least, anytime people add these headlights or tail lights I really lose my S2000 boner.  OEM is perfection.


This AP1 is packing an HKS super charger.  Probably spent all of his money on the HKS Super charger so he had to go for the eBay headlights……


It was the first time seeing the Rywire Sema S2000 in person and it is glorious.  It’s amazing how much nicer it is in person compared to in pictures.  I spent a good amount of time looking over the fine details of this build since I’ve worked on a number of stock S2ks over the years and know when I see something not OEM under the hood…..


In pictures it does look strange with the really wide hips…..But in person it doesn’t look too drastic.  Who can say no to the Mugen SS Bumper… especially one that has been widened for extra smileys.


I’ve had numerous ITBs on my personal S2k, so this Kinsler unit with the top feed injectors definitely peaked my interest.  It’s interesting how Ryan integrated the DBW module and basically machined a shaft to match up with the Kinsler linkage.  I’m pretty sure he’s using a Subaru Drive by Wire throttle unit.  The way this was done, it could only be done with the Kinsler ITBs because the linkage is sideways compared to other itb setups….. Not the best explanation I know.


I love how extra plates with gussets were welded to the body to look super OEM.  The bung coming out of the brake master cylinder was interesting.  I really like this brake line look…. super tempted to do an ABS tuck….


really clean and tidy setup.


interior was very simple with a Mugen Gen III Steering wheel and JDM Recaro RSG.  Looks like a pretty beefy rollcage, but lets be honest, this car will never see a race track….


Interesting blend of the Mugen SS rear bumper and Mugen Ap1 rear trunk lip.  For me the side skirts make the car look really boxy and loses one of my favorite S2k lines.


Another SEMA heavy hitter, the Mode Parfume Ap1.  Mode Parfume is mainly known in the VIP crowd.  Mode Parfume brings an interesting look to the S2k, really rounds out the lines of the car.  Besides the kit this car is rocking a J’s Racing hood and Volk TE37.


The blue this car is painted is excellent.


Next to the mode parfum car was this J’s Racing Widebody Turbo’ed S2000, I follow the owner on instragram.  This looks like a very well executed build, with the power to match.  Love those Project Mu calipers and craftsquare mirrors.  Sometimes it drives me insane when there is a crazy widebody S2k, but is running a stock engine….. Wide body needs the power to match the looks!


nice and tidy turbo setup…. big ass turbo at that.


I saw this car for sale recently and it listed Tein Flex suspension on the car, details like this make me cringe, like seriously, you’re gonna spend 30k+ on body work alone and then you’re gonna get the cheapest jdm suspension you can buy…..  I was pleasantly surprised when I saw motons on the car.


Greddy showing off their Gen 2 Turbo Kit.  The only smog legal turbo kit for the s2000.  For the Gen 2 turbo kit, Greddy redesigned the exhaust manifold to make it much stronger, the older generation manifold was known to crack, in addition to the redesigned manifold, Greddy upgraded the turbo to a more modern Garret GTX2867R, oh yeah, Greddy ditched the super outdated eManage and now run Hondata flashpro.


I believe this car is actually owned by one of the owners of Evasive Motorsports.  Super clean build with voltex front end, volk te37, and project mu BBK.


I would love a 2nd s2k and boost the hell out of it.


Another shot of Gotuning tommy’s ASM’ed S2k running Titan7 wheels.


This booth stopped me in my tracks.  Nisin, in addition to making cup noodles (JK), they also make the OEM brake calipers and Spoon calipers!


Nisin had this on display.  It’s a 6 pot caliper they are planning to release soon.  They revealed to me that the new Spoon BBK is going to be based off of this caliper.  I can’t wait.


In addition to the BBK they are planning to release, they have performance brake pads available now!


All types of S2ks were present, including ones like this…..


I saw some random Japanese people at the Pit Garage booth…. later I found out it was the J’s Racing president…. oops, should of got him to sign something.


ICB selling high quality JDM goods in addition to the new Regamasters.  On the table we have a beautiful saclam exhaust.  For people that don’t know, the guy that runs Saclam is an ex-Mugen Engineer.  That’s why if you look at older mugen exhausts for 90’s Hondas, you can see the influence he had on the exhaust tips.


Interesting wrap color on this Type-R.



Pricing for the Regamaster Evos


I walked back to say goodbye to some S2k people.  I couldn’t help to notice Moses’s  Amuse Euro 70mm exhaust with some gold bling bling….


People were leaving, love all around….. refreshing from all the internal hate of car things in my heart (kidding not kidding)


Russan Hammer snapping a few shots for the gram.


Another shot of dimsum Jon’s car.


JDM umbrellas were out in full swing.


Moar of this.  I wish I framed this better.


stopped by to look at the finer details of this new Greddy kit!


Sara Choi’s S2000 CR I used to see rolling around in Monterey Park…. I like the Volk Te37 on this, really flows will the rest of the build’s dark accents.

Life: Eibach 2018 at AutoClub Speedway Part 2

Welcome to part 2 of my Eibach coverage. I’ve been overwhelmed by the positive response I received in the past few days, you guys are the reason that I keep taking photos, as crappy as they are, and continue to keep writing as horrible as my grammar is…..

I was blown away at the line up of S2ks.  It was like seeing an Instagram feed of S2ks in person.

Let’s start where we left off last post in Part 1


I wasn’t aware who this was in part 1, but my buddy let me know this is JDReyes


Voltex kit with ASM fenders, Spoon Hood, and White Volk CE28N…… all in Cocaine white.


Russian Hammer’s White ASM Ap2 with newly bronzed Volk CE28n again……


If there is one kit I’ve seen take over the S2k scene in the past few years, it’s the Voltex body kit.  It has really taken over in the past few years since Evasive first dropped the sketches to the public on FB years ago….  It’s a great looking kit, but to me it was destroyed by how many rep kits they are nowadays.  I do agree it is probably one of the most functional body kits since voltex did test it all in a wind tunnel.


Another voltex kitted S2k running Volk TE37SL with EVS fenders and an ASM hood with EVS hood vents.  Something about the vents on the fender reminds me of when Z3 fenders were super popular on imports, hell even my Honda Accord with a purple body kit had them back in the day.


Another angle.


Yep, Voltex is very popular.  Note the J’s Kitted S2k by S2Boost parting the sea of voltex


EVS fenders on this white Ap1 with a spoon hood and voltex front bumper by kaotik


side shot showing the red ce28n, voltex front flares, voltex sideskirts, circuit garage rear over fender, and craftsquare mirrors.


Silverstone Ap1 with voltex front bumper, spoon fenders, spoon hood, and craftsquare mirrors.


Hector Lavario’s Voltex kitted Ap2…..


All these S2ks looking super clean….. I’m not sure if it’s because i’m ADHD or jaded, but I miss seeing the variety of tuning styles in S2ks.  There are so many different manufactures of body parts for the S2k, maybe it is the effect of social media, but s2ks now are looking pretty similar following the same cookie cutter mentality, most S2ks run the same type of body kits or parts, like a voltex body kit, voltex wing, Amuse R1 Bumper (I’m guilty of this), CE28 or TE37….  Only 12+ years ago, I remember there was a variety of styles people were trying out, such as Tracy Sports, Amuse Wide body, INGS+1, Cwest, Car Garage Amis, Sorcery……  I can’t remember the last time someone actually brought up INGS+1 in a conversation,  I think it’s a great looking front bumper.


Voltex wings all around.


S2k row.


I think this is the first time I’ve seen car shop glow tail lights in person……. Digging the rear end of the Silverstone Ap1.  Voltex Swan Neck wing + CSG tail lights, K1 Laboratory Duck Tail, and what looks to be a J’s Racing Exahust.


Another shot showing the Volk ZE40.


I just realized that the sebring silver car to the left is rocking Euro headlight washers…. It’s funny how europeans can’t get rid of these fast enough, but on the other side of the ocean people are adding them to their cars.  The Volk TE37 fitment looks so period correct on this Ap1.


Next to the row of S2ks, they were a row of DC2, most of them being type-r…. Phoenix yellow is so good.


And Championship white.


relatively modest ap1….


I wonder if this spoon sticker is the reproduction or an original?  He’s also rocking a Spoon snorkle and J’s Racing cooling plate….


Another shot of Joe’s S2000 CR


I think Kaotik was explaining why he gold wrapped his Mugen intake something something…..


One of the few Turbo’ed S2ks in attendance S2boost.  It must be a SMOG thing, but they don’t have as many Forced Induction (FI) S2ks on the west coast compared to the east coast.  I remember a bunch of guys out east turboing their S2k when I lived there.


Joe’s S2k CR never ceases to amaze me…..

I’ll cut if off here.  I’ll post up part 3 soon which will complete my coverage of Eibach.  Once again, I must iterate that Eibach 2018 was a HUGEEEEE event.  I didn’t even get to see half of the event because of the utterly large amount of cars and decided to focus primarily on what I know, S2000s. Although I did own an EG civic at one point in my life and did preform a B16a swap on my friend’s EG, I will admit my knowledge in other Honda chassis is lacking.

Life: Eibach 2018 at AutoClub Speedway Part 1

Hey all,

Been a long time since I did a real post.  I’m still slowlyyyy working on my youtube channel.  This was my first real S2k event in a year or 2 since I quit my job.  It was great seeing friends I haven’t seen in awhile and putting faces to the Instagram screen names of people I’ve never met before.  On this particular day it was scorching hot, like really hot as hell. I had to come out, my buddy Gabe, told me that they’re gonna be a very strong S2k showing and since this is S2kandtheAnt, I know I had to come.

If you guys aren’t from SoCal, this event took place in Fontana, Fontana is a good hour + east of Los Angeles.  The thing about LA, the more east you go, the more desert it gets.  I swore it was good 90+ degrees out there.  I rolled with my buddy Peter, who has a pretty sick S2k of his own.  I’ll post up pictures of his car some day,  he has a pretty nice build in the works.

After arriving at Autoclub speedway around 10:20, 20 minutes after the event officially opens to the public, we sat in line to get in for 1 hour and 20 minutes.  Yeah, you heard that right, almost a hour and half we spent waiting in line looking at the best civics the Inland Empire had to offer (take that anyway you wanna look at it).  While waiting in Peter’s S2k, I came to the realization that my S2k will definitely retain it’s AC…. No way in hell I’m deleting that shit, it’s not worth it for scene points.  On the bright side, the Eibach organizers did allow us to get in free of charge, probably because they were trying to move the line as fast as possible, I like how they took accountability! Big ups to Eibach Organizers.

Another thing I wanna add, for some reason this day, I was wearing shorts that had the the crotch blown out, like it was coming apart at the seams…..shorts that are over 14 years old will do that. So I didn’t want to expose myself by crouching for pictures…. So you’ll notice some of the angles I shot aren’t the best…. and also did I mention it was hot as hell…. I was rocking a spoon umbrella in one hand, my camera in the other hand, and hoping that my nuts down get exposed….. tough life.


After we finally parked.  The first thing I saw was this clean PY ITR.  I’m sure the parking lot had a ton of goodies, but I didn’t want to chill in one place after sitting in line for over a hour, I wanted to get to the actual meet!


Familiar faces all around.  My buddy Chris Lum with his super mint Mugen Ap2 with JDM ap1 clear headlights and Mugen MF10.  I don’t think I’ve actually seen his car with MF10s on it in person before this.  I love how King Motorsports is re-releasing mugen goodies for non-rape prices now, like the Mugen B2 Radiator caps.  Small things like this help people like Chris and I really complete our builds without buying outrageously overpriced 2nd hand parts, seriously people were trying to sell those things for $200 a pop.  Now where is the Mugen Spark Plug cover re-release!!!!!


Chris was posted in front of the ICB Motorsports tent and so was this Civic Type R FK8 with Regamasters.  ICBMotorsports dropped their new re-release of the Desmond Regamasters!  I love how people are putting in an effort to release these wheels again, I don’t care if the market becomes “saturated.” It’s helping enthusiasts get their hands on these wheels without trying to find crappy 2nd hand stuff.  Sorry for the pole haha.


ICB selling legit Desmond stickers.  Perfect for your Rotas!


Clean Silverstone Ap2 behind the ICB booth.  Rocking a Back Yard Special (BYS) wing and Spoon SW388 rims!


Better shot of the Spoon SW388 rims!


Simultaneously with the meet, there was also drag races live on the track to give this meet a great atmosphere.  Sportcar motion brought out some badass drag S2ks.  I believe that black one was on hoonigan awhile back.


These Regas are a perfect reproduction.  Spoon is also bringing back the SW388, but are slightly curved outwards for better Big Brake Kit (BBK) compatibility.


Love the Color on this EG civic in front of the ICB booth.


Great front shot of Chris’s Mugen Ap2, stunning people as they walk by.


This M&M Honda widebody DC5 caught my eye.  I don’t see too many of these kits in the USA and with the color it looks absolutely true to the JDM demo car.


Another great EG civic.  I love the Olive Color and blue TE37 contrast.


Gotuning Tommy’s immaculate ASM’ed S2000 CR.


swung by the GoTuning X Spoon USA booth to say hi to Areen


All sorts of Spoon goodies for sale.  Of course due to the intense sun, they sold out of Spoon Umbrellas this day.


Brand new Spoon support brace for the Civic Type-r FK8.  My favorite thing about Spoon is the whole OEM + feeling you get from their parts.  For example, the Spoon S2000 Upper Control arm reinforcement gusset was a piece that was actually created by Honda, or how the B16A Spoon cams feel just like the OEM B16A Cams in material texture.  With that being said, I wouldn’t be surprised if this Spoon brace for the FK8 is actually made by Honda, just look at it, if you work on enough Hondas this screams OEM.


I picked up the Kanpanchi Auto Salon T-shirt for my wife and I.  It came in a sweet Type One bag.  Hopefully I can go some day.


So much want


This is what I came here for, the row of S2ks……  Most are Instagram famous, up front is Hector Lavario’s  Ap2


My buddy Rival Gabe sick Ap2-1 sitting nice on TE37.  I like this look way better than the Mugen MF10s he had before.  This reminds me of that super expensive Pizza in New York City that has like Caviar, Truffles, goldflakes, Fois Gras, and doesn’t really taste all that great.  Each ingredient is a standout by itself, but for some reason together it doesn’t work…… Basically saying MF10s don’t work on every car, it’s about execution and TE37s work much better with the overall execution even though the Mugen MF10 is a more “rare” wheel.


And next to him was Naglas De Fierro’s S2k.  We’ve actually seen his car before here.  His car has definitely come a long way!  His car is rocking an ASM IS Design front bumper, Mugen intake, Car Garage Amis hood cover, Mugen MF10s,  and Mugen MS-Z seats (not pictured, I didn’t want to sweat all over his interior).  Personally it was my first time meeting him in person, and he’s definitely pretty rad!  Of course, I love how all the parts are authentic, that’s how I roll.


Closer look at the engine bay.   He’s rocking an Origin Fab intake arm, science of speed hood dampers,  ASM Oil Catch can, Amuse Header, and  ASM Tower bar!  lots of ASM goodies here.

Finishing off the rear, he has a Mugen SS Rear wing, ASM duckbill, painted of course!, ASM tow hook, with an ASM 04 rear bumper, and Amuse Euro S Exhaust!


This grey Ap2 next to him was pretty cool.  According to the license plate it’s a S2000 CR?! Like Naglas, he’s also rocking an ASM IS design front end, but with voltex flares.  In the world of crazy flared fenders and such, voltex flares seem almost conservative.


Out back some remnants of the CR remains, like the rear wing.  I just noticed his burnt Ti finished antenna, interesting…. I wish my ASM antenna never got stolen.  More noticeable un CR like qualities, besides the color, are the M Racing mirrors, and Mugen Hardtop.


Front ASM goodness.


My buddy Joe, aka John JingleHeimer We’ve seen his car a few times.  Like the Grey car next to him, his car is also an Honda S2000 Club Racer except done Mugen.  The Mugen Dry CF hood is looking nice here.


The Apex blue really shines in the sun.  He’s rocking some rare White MF10s, since most people that copped the re-release MF10 have Bronze wheels, so you know he’s really OG since with this white set and blue caps.  More Mugen notables like the Mugen Wing, Hardtop, and Mirrors.  Not pictured is his endless calipers!


Dry carbon glistening in the sun.


Some Instagram people I met in real life….. like DimSum John.  He bought his leather Pole positions from my friend Alvin which used to be owned by a friend of Joe, the guy who he is parked next to.  Throw back to when we installed these pole positions in Alvin’s car….


Car kind reminds me of my old build a bit probably because it’s Silverstone + Amuse R1 bumper,  I believe this is his first authentic Amuse R1 bumper after owning many reps of it.  Hopefully once you go authentic you don’t go back!  Besides the bumper he’s rocking M racing mirrors on custom mounts that some guy on S2ki made awhile back and Volk RE30 wheels.  Don’t see too many RE30s these days on S2000s.


Saw my friend Russian Hammer!  He actually bought my Mugen passenger side rail awhile back and I chatted with him during the ill-fated top down meet 2 years ago.  He’s rocking an Authentic ASM front end with the ASM IS Design front bumper + ASM fenders and ASM rear fender flares.  Mugen top and voltex wing are so necessary.  He recently changed his wheels from Red to Bronze…… I know you can’t see it that well haha.


The voltex front bumper was out in full force!  I think it was the most common front bumper on the S2000s there!  This white car was parked along with the other white s2000s.  I like the look, voltex front bumper + spoon hood and ASM fenders. Loving the white CE28 and voltex wing.  Great execution with a variety of different companies.  I dig how he’s repping 7apple, great body shop, my buddy is getting some parts painted there as I write this.  I’m not sure who this car belongs too.  Man Eibach 2018 was huge, I didn’t even get to walk the entire show because it was so large.  I mainly hung out around the S2ks….

I’ll continue this post in Part II…..

Life: Noods and Spoon

I’ve been pretty MIA from the real life S2k scene in SoCal. This past Tuesday I met up with some friends at Meiji Seimen in Costa Mesa. For people that don’t live in LA. I live in the LA area…. my friends live in OC. Going to OC is like driving to a different state for me. It’s like when I lived in Northern Virginia and I had to drive to Maryland, it was like that.

Foods
Met up with the dudes at Meiji Seimen. They are known for their Udon noodles. We were gonna meet at a Ramen shop, but that parking lot was tiny! so we moved on over to this spot.

Foods-2

They had some weird special, this is some Curry Udon thing I ate…… I should of just got their normal Udon soup honestly. I was hungry as hell so I ate it all.

With S2k ownership over the years, I notice a cycle. There is a group of owners, they own the car for a bit, then they sell it and pass it on to the next generation and then the next generation does the same thing and repeats the cycle. I am now noticing around me that this generation of S2k owners are selling their cars and are moving on to other things. I am a diehard, even though currently this generation of s2k ownership is changing, and new owners don’t care about the JDM goodies I lust for, I’m still in this for the long run, even if I have the means to buy a “better” car or newer car. Even then so, it’s the people that really make a community.

TuesdayNightOut

No stranger to the site, Areen’s Spoon S2k. He’s gone through a few changes since I last saw him over a year ago. That hood, looks familiar right…. He just switched back to the Spoon bumper after rocking an ASM 04 bumper for a bit.

TuesdayNightOut-2

ASM hood + Spoon Bumper. Another look immortalized in the internet for future s2k owners to visualize!

TuesdayNightOut-3

Another small change, Areen Painted the top half of his Super Expensive Mugen Dry CF Hardtop!!!!! crazyness.

TuesdayNightOut-5

I think he already had his ASM dual exhaust last time I saw him. I remember he waited a good amount of time for this.

TuesdayNightOut-4

Love how every came together in the rear. I wouldn’t change a thing….. Which brings me to another point. When people get to the pinnacle of their build and they have nothing else to do….. usually it goes a few ways. They either do a crazy overhaul, or they sell the car……. Or maybe keep it forever in this form? The later is what few do haha.

TuesdayNightOut-7

This is car life. Parking lot + BS.

TuesdayNightOut-6

Hope to go out to more car stuff, but life gets harder as you get older, especially when you add little human to your life.

Life: 2017 Honda Civic Type R at Raceline USA

Recently a friend of mine, pro-racer clement, took delivery of his 2017 Honda Civic Type R. It is pretty amazing that Honda brought their Civic Type R to the US shores…. although we all wish they did it years earlier! Maybe because all the enthusiasts that wanted an EK9 CTR back in the day when they were new are actually old enough and at a point where they can afford a 2017 model. I might be in the minority here, but I think the car actually looks good….. It’s 2017, so it has to have 2017 type styling.  Everything nowadays is derived from aerodynamics, so modern cars do tend to have similar lines.

We put the car on the dyno at Raceline USA to see what numbers it puts out…. This is the first time I made a video really, so check it out!

Final results, 280Whp when the engine is cold! and 282Tq!!!! crazy numbers, this puts it over factory rating. But after the engine warmed up, the whp was around 267. There is power to be made with some tuning, as with all turbo’ed cars. Clement gave me a ride in this car around the block, and it feels pretty quick, power is very linear, reminds me power wise like a tuned twin scroll turbo WRX. The car felt like it handled well, probably because Clement is a super pro racer haha..

I can’t mention Raceline without this car.  Another Type R, the Integra Type R.  This car was actually in Hot Version American Touge 2.  I used to watch all of the Best Motoring International Videos growing up, American Touge was one of my favorite series, because it showed that American tuners can hang on with the JDM greats.

Haven’t taken car pictures in awhile….. so I forgot all about the polarizer.  I like the red stripe on the rim, reminds me of “Time attack Volks” from back in the day with red rings.  I love the massive Brembo calipers and LED headlights.  The car looks great in black.

No the lip is not real Carbon Fiber…..”It’s a Honda not a Mclaren” as Elton said to me.  I wonder what Mugen will do when they come out with a Kit, maybe make all these fake honeycomb grills real!?!?

Inside Clements Civic Type-R…….


Carbon fiber backed bucket seats!!! Although I heard this is faux Carbon Fiber also.  The buckets were thick and supportive.


True Asian style, he kept the plastic on the seats.


The Cluster is an LCD display.  I wonder how this will look 10-15 years later?  I prefer analog needles myself…. I even dislike the S2k cluster….. But having a single LCD display does make sense for packaging reasons, you can jam a lot more information on the screen.


Strapping the car on the dyno.


more faux grills


Dual exhaust tips with a 3rd tip for the wastegate dump!  Most likely taking inspiration from the Ferrari F40.


A quick peak under the triple exhaust


Amazes me how Elton has all this random JDM stuff all over. Like this ARC radiator! It looks S2k sized too!

I took a look outside…. This S2k Elton was working on caught my eye.  First thing I noticed were the J’s Racing exhausts that were mounted high.  Clement said this car has a J’s Kit on it usually.


Volk TE37SL and missing Over Fenders.


I couldn’t help to notice the crazy Twin Scroll Turbo setup.  I was told this car has a f24 stroker in it.

Twin Scroll Turbo setup with dump tubes probably sticking through the hood.


It looks like this is rocking a Full Race manifold and Fullblown intake manifold.  I don’t know too much about Turbo setups unfortunately…


Another interesting car I saw in the parking lot was this 240z….


Timeless looks…..

Life: S2k Cruise in San Diego

Just because I don’t “have” an S2000 does not mean this is not S2kandTheAnt…. I lent my camera to my friend Alvin to take some pictures of an S2k cruise a few Sundays ago. The cruise was through the very scenic mountains in the San Diego area. For those not from LA, San Diego is about an 1hr+ away from where we live, sometimes longer because, you know…..LA traffic. It’s a real thing, trust me. He snapped a bunch of pictures…. of rad cars in attendance.

03-26-2017_Cruise-2Not only were S2ks on the trip, but a few NSXs decided to swing by….


This NSX looked really fresh…interesting bling bling wheels.


Clean execution of an New Formula Red S2k, Ap2 lip, ZE40, Stoptech Calipers, and an OEM hardtop.


I could do a “yo dog” joke here, but interesting s2k air freshener.


Long Beach Blue NA2 NSX.  Whenever I think of a USDM spec NA2 NSX, I think of this color… There used to be one around my neighborhood growing up, it was probably brand new then.


Some cars definitely made the hike out to the cruise, This particular car came from Utah, while the first NSX came from Arizona.


This yellow NA1 Looekd pretty cool.  It was the most modified NSX in attendance.


I’m loving the OZ superleggeras on this car.  I used to have these rims on my Wife’s GC8…. 2.5 RS yo!


The sky was incredibly clear this day


Personalized license plates were out in full force.


Another shot of the NA1 NSX with some custom LED turn signals.


Since my friend has a Laguna Blue S2k, it was interesting to see the differences of color between the Long Beach Blue and Laguna Blue. Laguna blue seems to be a bit lighter.


An Evo 8 was in attendance. I’ve always wanted an Evo…..


They stopped by Alberto’s Taco Shop…. Alvin didn’t partake, because he had a long drive home…..


These yellow flowers were everywhere. They looked like dandelions.


A closer look at the NA1 Yellow NSX. Some LED tail lights to go with the GT wing.


Comptech/CT Engineering SuperCharger.


Interesting Strut brace, must be a reason it is designed like this.


Group shot!





Alvin’s LGBTQ, I mean LBP Ap2. On some Sticky Michelin Pilot Super Sports……







Final stop was this Pie Shop.




Alvin said the Pie was awesome….



I’ll try to have more posts up before I go back into full study mode….  Shoutout to Murphy for making this all possible!

Parts Review/ Life: MyAmuse in SoCal & Amuse Lug Nuts!

Hi all,
My friend Warren came out to SoCal to attend a wedding.  You can following him on instagram here .  He stayed at my place for a few days.  Of course he showed me his awesome and expensive Amuse Lug nuts.  

His Amuse R1 Bumper, Amuse Hood S2k!  Sometimes I see my own car when I see his….. RIP old S2k 😦

 


The first glance at the Amuse Titanium lug nut.  The lug nut is insanely light, even compared to the Volk Racing Lug nut.  It’s an open ended lug not, so you can run these with extended studs!


Yep, that is Chris’s Mugen S2k!  Bronze CE28N for days…..


Apparently it takes more than one person to install the Amuse Lug nuts!


Goes well together….


So Amuse lug nuts, are they worth the money?  They’re super light and have “good fitment” haha hopefully lug nuts should have good fitment.  I would say maybe?  They sure look great.