Parts Review/ DIY: ASM THROTTLE BODY IS-09 + ASM THROTTLE BODY SPACER IS-09

 

What really brings me pride with this S2000 blog is that I do installs/Parts Reviews of rare or expensive s2000 parts.  Parts that usually have just a small blurb written about them on minkara in Japanese and there is barely any in depth information about it anywhere else on the net.   We all know Japanese tuners really suck at internet-ing.  I’ve been lagging on the S2k since I’ve been trying to remodel my home bathroom on my own with no prior knowledge of really working on homes……it’s coming together slowly.

My buddy Princess Yow purchased the ASM throttle body and ASM throttle body spacer locally.  He’s not too much of a wrench, and installing a throttle body on an S2k is simple install so I had him swing by the Ant Garage, I love showing people how easy it is to wrench on their cars, especially S2000s, everything is super easy to work on.


So what is different with the ASM throttle body compared to an OEM one?  The ASM throttle body is a slightly larger diameter.  The entry diameter of the throttle body is 70mm while the exit is 66.5mm.   Of course since Princess Yow has a 06+ model, we have the version made for DBW cars.


The ASM throttle body is made by Toda Racing.


Princess Yow also got the ASM throttle body spacer to go with his ASM throttle body.  What this spacer does is smooth out the transition of the big throttle body to the stock intake manifold.  You can also accomplish this by porting the intake manifold, but this is much less invasive.


The ASM throttle body spacer comes with 4 bolts and 2 throttle body gaskets.  Once for each side of the throttle body.


The best feature of the throttle body spacer, this beautiful ASM logo…. If you have an Ap2, make sure you buy the AP2 version since the intake manifold opening diameter is slightly larger than an AP1.


Love anything that says TODA Racing on it…..


Princess Yow and I see eye to eye on many things…. He’s also a huge fan of quality JDM products.  His engine bay consists of a Mugen intake, ASM Tower bar, Amuse header, and ASM cooling plate….  He’s running Ohlins, a Koyo radiator, and samco hoses in case you guys were wondering.


I dived into his piping hot engine bay…..I already removed the intake arm in this picture.


The stock throttle body removed, it was quite easy.  Just remove one clip holding in the harness, and 2 hoses that run coolant through the throttle body.  Man DBW cars are easy to work on…. no need to take of the throttle cable.


I attempted to install the throttle body spacer… First gasket on.


2nd Gasket….


and ASM throttle body….Love that ASM logo up top! At this moment I realized why the throttle body spacer came with 4 long bolts….  The OEM studs that hold in the throttle body were too short.


Feels good putting more ASM parts on the car.


I’ve taken off my fair share of bolt studs in my day.  So to take off the studs off of this application, take two nuts that thread on the stud, tighten them against each other with 2 wrenches, and then with one wrench spin it counter clockwise to remove the stud it is attached to.


I didn’t use these nuts pictured, but nuts I had in my bin…. But you get the idea.  I have a video coming out soon.


Here it is all installed!  Keep in mind since you installed a spacer, this pretty much moved everything throttle body forward 1/2″.  Don’t forget to reconnect the 2 coolant lines back in and plug in the map and throttle sensor.


If you are OCD, feel free to trim out the area that the throttle body gasket protrudes.


The intake arm gave us a little resistance since everything was pushed forward 1/2 a inch… It was silicon so it wasn’t too bard.  I don’t know why Princess Yow doesn’t run clamps on some of this stuff….


The intake arm is now rubbing against the ASM strut bar.  I believe if you retain the OEM arm, it does not do this.

Since we were already wrenching…..

After we tackled the throttle body install.  We did a full fluid change, transmission, oil, and differential, and installed two new OEM remanufactured S2000 rear calipers…..


The finish alone is why this is better than autozone remanufactured calipers.  I noticed his recently installed autozone calipers were already rusting!  I believe he got these from Majestic Honda, a very popular online Honda dealership….


The rear calipers installed!


Nothing can beat new.


We were wrenching late into the night… I didn’t really take pictures of his car since I was getting pretty tired at this point.  But he is rocking some Mugen GP wheels.  Don’t see too many of these on cars nowadays.  I think we finished wrenching around 5am…. We started around 10pm.


to finish off this post, check out his Spoon calipers! I took this picture right after I helped him bleed his brake system….  For spoon calipers, we bleed the inner bleeder first and then the outside bleeder.

 

Advertisements

Parts Review/ DIY: Spoon Sports Hydro-Blue Wide Mirror Glass Set install

Hey guys,

I recently installed some Spoon mirrors for my friend’s S2000. Instead of following the instructions it came with and installing the mirrors over the mirror glass, I installed the mirrors onto the OEM plastic mirror housings. This created a very secure mount, and the mirrors do not wiggle at all. I created a youtube video on how to do it.  I didn’t take too many still pictures, so you gotta watch the youtube video to follow along!

I’m still learning about the video making process.

Parts Review: OEM Blue S2000 Soft top

It always amazes me when I think I know a ton about the S2000, but then I find new information that blows my tiny S2k centric brain. For example, did you know that from the USDM factory that Honda offered an OEM blue soft top as an option? Well I didn’t and when I found out I had to see this on a car myself, or at least the soft top in person. I paid a visit to my friend Alan Lee, who installs soft tops in the Socal area and is a master of said process. Search for his name on any Facebook S2k group if you wanna contact him :p

On with the pictures!


Brand new OEM blue soft top in the OEM Honda box.  The box was massive.  It’s such an interesting shade of blue, not too dark, and not too light.  Of course this is an glass window model, I used to have a plastic window on my S2k and it was always so damn cloudy out the rear!  If you have an 00-01 S2k, upgrade to the glass window, trust me.


Since Alan Lee does so many S2k Soft tops in the SoCal area, he happened to have a blue swatch of a Robbins brand soft top.  You can see how much darker the blue Robbins soft top is, and you can see the difference in texture compared to the OEM one.  The OEM soft top looks like it’s much much more flexible.


Alan informed me that he really takes his time and sands down the areas that the OEM soft top rubs against to minimize tearing that is such a common occurance on our S2ks.  Alan even built a special table for doing these soft tops, talk about dedication!


He recently picked up a CR that he’s gonna turn into his new track car.  Previously he was just using his red Ap2 to track.  What a crazy guy, tracking a CR!  These S2000 CR are climbing in value recently selling for outrageous prices.


Some S2000 CR Goodness. The front bumper was off for some track prep.

BlueTop-9
He is on temp prodrive wheels right now on Michelin Cup tires!  Not many S2000s are running Michelin Cup tires out there! He has center caps for these wheels too, eventually he will put it on.


His old track car that is slowly becoming a “show” car and street cruiser.  Pretty clean build, his most recent edition to this car was the removal of the Amuse bumper and the addition of the J’s Racing half lip with canards.  It looks great on red! especially with those Volk Racing ZE40.


You can really see how tight the J’s Racing half lip sits.  Not too many cars are rocking these nowadays.

And BAM! final product on a Suzuka blue S2k.  Blue interior + Blue top…. craziness.

Parts Review: Toda High Power Clutch

I haven’t really seen any good insights on the Toda High Power Clutch while I was searching for info regarding this clutch, so I thought I would write a quick review about it.

These are pictures of my Toda High Power clutch before I sold it…..

Toda High Power Clutch-2
Front clutch cover shot of the Toda High Power Clutch.

Toda High Power Clutch-3
Does the front clutch cover look surprisingly simliar to the Exedy Hyper Single clutch? Or maybe they aren’t many ways to design a clutch cover.

Toda High Power Clutch-4
The Flywheel cover is held on by allen bolts

Toda High Power Clutch-5

The actual clutch disk is a Exedy unit that you can buy replacements via Exedy.  The part number is TA095.  This one is obviously worn after years of use.

Toda High Power Clutch-6

The flywheel is the standard Toda chromoly flywheel.  I inquired with toda if it is okay to resurface this flywheel and there response is as follows: ”

The TODA Chrome-moly steel flywheels cannot be re-surfaced – this is inherent to this type of flywheel design (Chrome-Moly, whether it’s from Toda, Mugen, Jun, etc). 

The metal gains its strength from the surface treatment process.   But when a flywheel is resurfaced, all the surface metal which is heat treated for strength, is removed, exposing untreated metal.  “
So basically it is not wise to resurface your toda flywheel.

Toda High Power Clutch-7

Toda High Power Clutch-8

How does it feel?  The high power clutch disk feels like an Exedy Hyper Single.  A bit heavy for the street due to it’s 6 puck clutch and requires a good amount of effort to get the car to move.  The Toda flywheel on the clutch kit does allow the engine to rev faster.  On the race track or with upgraded power, this clutch would provide the clamping forces you would need, but for the street I believe it is overkill.  This is probably why Toda released their Ojisama Spec Toda clutch, aka old man special.  I am curious if Exedy is the white label that produces the clutch cover for Toda and all toda did was provide their flywheel with this kit. Since we know Exedy makes the clutch disk and the clutch cover looks identical to the Exedy Hyper Single besides the color difference and the small grooves on the cover.

Please see a picture I grabbed off the GoTuning website.JsRacing_JHH01SD-CH03S

Parts Review: SPOON SPORTS MUFFLER KIT

If you guys know me, I’ve been selling off a bunch of my S2k parts collection I’ve amassed (hoarded) over the years…. One of the items I’ve had is this super duper rare “SPOON SPORTS MUFFLER KIT” for the S2000.  Here is the link on Gotuning.  They sold it back in the day for around $1800.  I believe not too many were sold.  I know of one other exhaust in the USA that was recently sold by Hmotors for $1300ish……

I’ve had this for a bit but I never got the chance to really mount this on a car.  Recently a friend came into town and let me borrow the car for 2 weeks while he was in Japan on vacation.  So me being me, I did a bunch of random maintenance to his car, oil change *OEM filter only people!*, diff fluid change, changed out burnt out bulbs behind the cluster, install LED interior lights, valve adjustment…. which was sorely needed since it was an 06+ that was a bit tight on the exhaust side, which is also a typical 06+ S2k problem!

Oh yeah, I installed this exhaust on his car and made a video!  But first let’s look at some pictures.

Official description from Gotuning “Spoon introduces a sports muffler for a more subtle tone than the N1 muffler. Has a better sound than titanium by using SUS304 Stainless Steel. Designed for a quiet cruising and idling volume with a sporty tone upon acceleration. Does not drone for a clean and well-balance sound. Uses hollow hangers for increased weight savings.

Fits all S2000 model years.
Stainless Steel construction.
Made in Japan.

– 60mm piping at the cat to 70mm main piping.
– Tip size is 70mm.
– Weighs 8.72kg (19.22 lbs)

Spoon_S2000_SportsMuffler_01
I just realized I never shot a picture of this exhaust in its entirety.  Borrowed this from Gotuning. Now onto the shots I took!

Spoon Sports Exhaust
Classic Spoon muffler tips.  You can’t see it very well, but I have the Spoon silencer installed.

Spoon Sports Exhaust-7
This exhaust features hollow hangers which reduce weight! 
Spoon Sports Exhaust-8I used the Ap1 style muffler hangers.  Another cool fact is that the piping goes from 60mm to 70mm.  I have to use a special Toda Power Test pipe for car for that!

Spoon Sports Exhaust-6Badge life

Spoon Sports Exhaust-5I love how high quality this exhaust is.  The brackets welded on are perfection.

Spoon Sports Exhaust-4
weldporn/ resonator action. I wonder if this is the same resonator as the Spoon N1 exhaust?

Spoon Sports Exhaust-3This exhaust features a helmholtz resonator with a bracket welded onto it for extra support.

Spoon Sports Exhaust-2A nice shot of the resonator with some random take-out restaurant chopsticks under it…..

Spoon Sports Exhaust-13
Installed on my friends GPW

Spoon Sports Exhaust-12

Spoon Sports Exhaust-11
Silencer on! which needs it for daily driving…. trust me.

Spoon Sports Exhaust-10

Spoon Sports Exhaust-9
Close up!!!!

My thoughts on the exhaust. The exhaust is definitely loud without the silencer. With the silencer on, it’s quiet, sounds like my ASM 70mm exhaust. When the silencer comes off, it becomes very “boomy” more of a bass tone. With the silencer on I can hear the radio fine, with it off I can’t hear anything else, just the exhaust. With the silencer, there is more of an air wooshing sound during WOT, probably because the silencer is restricting exhaust flow. On my friends 06+ Ap2 it does hit the body, like many exhausts…. this can be fixed with a hammer.

Words are one thing. Here is a video I made:

And the offical Spoon video:

And from this random dude on a SC’ed S2k:

Parts Review | S2000 Fujitsubo Legalis R

Hey all,

1 Month in to baby ownership, and it’s been tired with many sleepless nights….. Good news, gives me more time to think about S2ks haha.  I saw a killer deal on a used Fujitsubo Legalis R online for my friend who was looking to move away from his Greddy Spectrum Elite.  My friends must be getting old if the Greddy Spectrum Elite sounds loud to him.  Unfortunately the Fujitsubo Exhaust was located in Japan….

So after a ton of money on shipping, a damn mint Fujitsubo Legalis R showed up at my house. Definitely would of been cheaper to find one used locally. The box it came in was massive, dual exhausts are not cheap to ship from Japan.

The JDM version of the Exhaust has a slightly shorter tip than the USDM version. The USDM version is not made anymore.
Fujitsubo Exhaust-2

Super High Quality, exhaust is actually relatively light.
Fujitsubo Exhaust-3

Love the welded reinforcement at this joint.
Fujitsubo Exhaust-4

The exhaust utilizes hollow exhaust hangers to cut down on weight. The exhaust is two piece, one super long section and a bolt on muffler section.
Fujitsubo Exhaust-5

The Greddy Spectrum Elite ready to come off. Interesting fact about the Greddy Spectrum Elite, it is a 3 piece exhaust.

If you were to ask me a honest opinion about the Spectrum Elite, I would say the quality could be better. I have a friend that bought his BRAND NEW and after a year, the resonator is already falling apart. It DOES NOT use the hollow hangers like in the fujitsubo. The sound of the Greddy Exhaust does sound decent.
Fujitsubo Exhaust

Fujitsubo Legalis R is on!
Fujitsubo Exhaust-6

After a slight polish it is looking better. We did a quick polish because Kevin had somewhere to be.
Fujitsubo Exhaust-7

Looking better, still needs more polish though.
Fujitsubo Exhaust-8

Exhaust is crazy quiet, still has a small bark to let you know that it is not OEM. In my opinion this exhaust is the epitome of OEM+. If you are an S2k owner not looking for a “tuner” sounding exhaust, this is the one for you.

Check out a quick youtube video I made so you can hear the differences between exhausts.

Parts Review/Pick Ups: Toda S2000 ITBs / Sports Injection

Hey guys.  I’ve had this part for a while now, holding onto it hoping that one day I can resume my build…..  If you guys know me, you guys would also know I’ve done the ITBs thing before.  In a previous life I had Jenvey ITBS. You can check it out here, jesus it’s crazy to think I was only 23 when I made the first post on this blog.  I regret not taking more pictures….

Here are a few pictures off of my flickr of the jenvey units:

IMG_005144
When you receive the Jenvey Kit, it’s unassembled, so you have to go about assembling the kit yourself.  The coolant temp sensor port to the right, you have to drill and tap that in yourself.  The coolant line to the left, that is not standard, I had to cut and weld from an intake manifold I had laying around.  Take note of the flange of the coolant exit, the bolt behind that flange is a pain in the ass to get once it is on the car.  I had to use an allen bolt and cut off the head of an allen key to reach it.

IMG_0052
You can see how I welded the factory coolant line here, so I can retain the bleed functionality.  I later cut this off since it wasn’t flush with the head…. dummy me, I should of checked beforehand.  Those vacuum ports you see, I had to drill, tap, and screw in each of those nipples…. (Stalker photography was a logo I was working with for awhile… I wonder what happened to that adobe file.)

My Jenveys waiting to be installed

All assembled and glorious looking.  Unfortunately, I was never happy with the fit and finish of these units.  I had to source my own injectors, I went with Ford Racing Injectors 440cc Injectors.


For the TPS, jenvey made an OEM s2k TPS adapter which I had to buy later on….

The problem I have with the Jenvey ITBs, that I’ve always repeated, is that the Jenvey ITBs were not created with the S2000 in mind.  They were created for F20/F22c kit cars.  The lack of thought, i.e the missing coolant bleed port, bad coolant flange design.  Hayward performance remedied this issue by creating their own ITB flange, and still utilize the Jenvey throttle bodies.


I’ve always wanted the Toda Racing ITBs.  I wish I went with this setup from the get-go. The Toda ITBs comes with a Toyota based TPS system and in the instructions how to wire this up to my current setup.

The fuel rail it comes with is beautiful.  Super heavy duty, it’s a billet piece.  The jenvey fuel rail feels like a cheap aluminum tube compared to this.


I love how these are compatible with the OEM s2000 injectors, so that cuts cost of sourcing different injectors and allows you the option of upgrading injectors later on.


For the Jenvey ITBs, I had to convert my fuel system to an -6 AN system.  For the Toda units, all you have to do is bolt the OEM Banjo bolt system to this fuel rail.  Little things like this is what I really like about the Toda system and JDM products in general.  The level is meticulousness is unrivaled by any other manufacture.



The TODA ITB units come pre-assembled.  They are based off of the Toyota AE101 ITBs.  The one I have is the 88mm units.


As you can see the whole is already tapped for the coolant temperature sensor and the flange for the coolant exit, is where the OEM intake manifold is, so it is much more accessible to bolt this to the head…


Same TPS as the Toyota AE101.


You can see how some of the vacuum ports work, there is 2 per runner.

Closer look of the linkage between throttles.


Of course this will plug and play with the OEM throttle cable, while the Jenvey units you have to come up with something yourself.


One port with a barbed nipple already.  Probably for brake booster.


The trumpets feel incredibly solid, as if they are machined out of a block of aluminum.  The Jenvey throttle trumpets felt really cheap to me, you can even bend the Jenvey trumpets by hand.


The capped off vacuum ports on the flange, and on the flange of the runners.

The knob you see in the middle if the main throttle idle adjustment… Not pictured is the coolant bleed port on the other side of the ITBs.

Overall, I’m really excited for the Toda ITBs, I mean it’s the same system that the ASM race car uses!

Parts Review: ASM Front Tower Bar

I’ve recently been unloading a bunch of my S2000 parts to clear out some garage space…..
I wanted to show off the ASM front strut bar….. it’s currently on the market to be sold, it’s on facebook and under the SoCal section on S2ki right now if you are interested.

For the non-enthusiast this is just an overpriced piece of metal.  All of the cheaper options such as the NRG, Megan Racing, etc are much much cheaper.  But they are all replications of this bar.  Each ASM front tower bar is made from one guy in Japan at Succeed Sports.  Read more about it here

When I got the bar, I was surprised how light the bar is and how solid it feels, it really feels like one piece of pipe.  Unfortunately I think this will get in the way of my Toda ITBs, oooppss did I say that?  My car is still in pieces so yeah….  hopefully s2k parts will still be affordable when I can put my car back together.

ASM front strut Bar
It’s the same concept as some expensive watches that are all made by one man that took years to learn his craft.  If this was a Porsche part it would be triple the price I bet!

ASM front strut Bar-3The welds are perfect, it’s amazing that this is done all by hand. You don’t get this with your Megan Racing knockoff! Those Chinese kids can’t come close.

ASM front strut Bar-2
As quoted from Gotuning, “They’re not simply color treated for show. The entire manufacturing process of each bar takes 4 hours so only 2 can be produced per day. Many ASM GT series bars hold design patents to protect their innovative designs.”

ASM front strut Bar-4
I’m a proud owner of this part, I hope it will go on to a good home in the near future. I wish I could tell you how this feels on a car….

Support Local Businesses Gotuning, the Only ASM distributor on the USA!

Tech/Parts Review: S2000 TRD Door Stabilizer.

I’m a big JDM fanboi, nothing new about that.  Being the JDM fanboy I am, I’m constantly searching  the web for new JDM tuning developments regarding the S2000.  I’ve looked through my HyperRev issues front to back more times than I can remember.  I couldn’t help to notice that many JDM tuners use parts that we, the USDM tuning scene, simply haven’t thought of yet.  Such as racing sized AC condensers that Stradale uses, which are half sized AC condensers so the radiator can receive better cooling while driving. A few USDM tuners take these “unheard of” JDM ideas are turn them into “original ideas” *ahem ahem *Ballade Sports *SakeBomb Garage… yeah those Ohlins lower perches or RX8 rear calipers are real original ideas dudes……

An item of tuning I noticed that a few JDM tuners are implementing is the TRD Door stabilizers retrofitted to work with the Honda S2000.  TRD, is obviously a Toyota branch (some would say the Mugen of Toyota (kidding not kidding)), so this is made for Toyota models like the BRZ/FRS/GT86.  This one in particular is the one not made for the BRZ but for every other Toyota model such as the Altezza, Celica, AE86….. model number MS304-00001. This would actually fit my Lexus LS430 daily driver.


All the way from Toyota Technocraft!


Unboxing of the TRD door stabilizers

All laid out….. On a Toyota/Lexus vehicle, all you have to do is bolt in and you’re off to the races…..

There are many ways of mounting the TRD Door Stabilizers to the S2000. I personally went with the CSOhara kit, or Creative Service Ohara. I found their products listed in my Hyper Rev Magazine and checked out their website. I used an importer to import me the kit. The Kit comes with instructions completely in Japanese. My Japanese is horrible, but it comes with pictures and you can find walkthroughs of people installing the kit on Minkara. I added links on the bottom of the page if you wanted to see how other people installed the door stabilizers not using the CSO bracket.


The instructions……

What the CSO kit comes with, two brackets, some allen head bolts, rivets, and stickers to cover the holes.  I think why there is coins taped to the paper is because my importer overpaid, and they are giving me the difference.

To prep everything, remove the OEM S2k door hinge.  Unscrew the pillips head bolts attaching the OEM bracket, use an impact screw driver since those puppies are on tight! A few whacks and I was able to get this off, it would definitely suck to strip those phillips head screws!


Close look at the TRD stabilizer kit.

The brackets….


First, you have to smash the raised portion of bolt hole on the TRD door stabilizer bracket, you want to make this as flush as possible.



Next you rivet the TRD door stabilizer bracket into the bracket from CSOhara.

After you rivet the bracket on, you have to flip it around and grind down the rivet so it is flush with the CSOhara bracket since this sits flush on your door.

Test mount!

Bolt in the CSOhara bracket to the S2000 Door with the supplied allen Head bolts…..



Attach the stickers  to cover up the bolt holes and slide on the plastic TRD door stabilizer pieces. Should look something like this when installed, I didn’t put the stickers on to cover the bolt holes.

Screw in the TRD Door stabilizer on the chassis side using the OEM honda screws.

Close the door and pray!  For some reason I was able to get the passenger side of my car to be flush, while the driver’s side intrudes a bit.  I might be because my car was involved in a hit and run on that driver’s side years ago….. After the install I notice my doors have a much louder thunk when shutting the door than before, a much more solid feeling.  As of driving dynamics wise, I feel that the car is stiffer, but it could all be in my head…..


The last picture I have of my S2k before it was parted out….. The best things about cars is that you can always come back…. maybe one day.  Sooner than later

Checkout these links of people on Mikara that installed the TRD door stabilizers on their S2000!

http://minkara.carview.co.jp/userid/2159608/car/1661832/3115806/note.aspx

http://minkara.carview.co.jp/userid/306830/car/200949/3091767/note.aspx

http://minkara.carview.co.jp/userid/1278993/car/942593/6990829/parts.aspx

http://minkara.carview.co.jp/userid/611808/car/1232388/3086656/note.aspx

 

PickUps/Parts Review: TODA RACING 60-70MM CATALYST ADAPTER (TestPipe)

I got some parts reviews I’ve been meaning to put up…. Since I have an ASM 70mm Titanium exhaust (Which I believe is the best S2k exhaust ever, much better than the SS version, the sound is so crisp!), I’ve always ran it with an invidia 70mm testpipe which is 70mm straight through, for what that is, the Invidia unit is a great value for what it is and fitment is spot on. This Toda Racing 60-70MM CATALYST ADAPTER, makes perfect sense to me, smooth transitions should mean higher exhaust velocities right?  I’m not an engineer, but it makes me feel better because it says Toda racing and has a sticker for RACING USE ONLY 

Toda Test Pipe-2I’m a huge fan of Toda Racing.  It seems like every Honda shop uses their products to build their engines, including the world famous KTECH….. and they run engines in Super GT…. How cool is that!

Toda Test Pipe
Of course another shoutout to RHDJapan some of the beautiful benefits of globalization….

Toda Test Pipe-4Quick peek inside….

Toda Test Pipe-3A good look at the transition….

Toda Test Pipe-6side by side shot with the harbor freight jack

Toda Test Pipe-5

Toda Test Pipe-7Absolutely beautiful….

Toda Test Pipe-8
Welds for days.

Toda Test Pipe-9

Toda Test Pipe-10

Toda Test Pipe-11

Toda Test Pipe-12I love how this comes with an OEM Quality Gasket.

Toda Test Pipe-13Bolted on the car….

Toda Test Pipe-14Mated with the ASM 70 MM Titanium Exhaust……

Toda Test Pipe-15
The only thing that would complete this would be an ASM or Toda Exhaust Manifold….. If only…..

Toda Test Pipe-16

After installing this on the car, the car was noticeably quieter on pulls.  I would assume this is because the air is moving faster now since it has a smoother transition, while before it was a 60mm exit on the header dumped directly into 70mm test pipe.  Honestly the car felt the same powerwise.