Life: Eibach 2018 at AutoClub Speedway Part 3

Final post of Eibach 2018 at autoclub speedway! I’ve noticed something with my pictures I need to take more into account when I’m going over them….  My pictures look drastically different my iPhones (yes mine and my wife) compared to what I see on both my Mac Pro Desktop and Macbook even though I thought I calibrated them….

Check out my previous post here if you pissed it.

On to the pictures!  At this point I was done checking out the cars in S2k row and started to venture out to the vendor area.  An overcast arrived that was greatly welcomed, so being not so hot AF I really took my time…


Always a classic S2k look for me, Powerhouse Amuse R1 bumper and bronze wheels, in this case Mugen MF10 (I do wish they were CE28N) and a black OEM hardtop.  This white car was also rocking spoon aero mirrors…. I still don’t know how I feel about the aero mirrors since I’ve re-fell in love with stock mirrors recently haha.  I’ll probably change my mind about that in a few weeks, as I always do.


I do miss my Amue R1 bumper…..


This new gen NSX came fresh off the drag strip.  It ran a stupid fast time….I just can’t remember what it was…. thrilling I know.  I believe it only has exhaust modifications done to the car.


Not really a looker this one…. It would be a half decent build if it wasn’t for those awful headlights.  Some mods really detract from the car, for example, for me at least, anytime people add these headlights or tail lights I really lose my S2000 boner.  OEM is perfection.


This AP1 is packing an HKS super charger.  Probably spent all of his money on the HKS Super charger so he had to go for the eBay headlights……


It was the first time seeing the Rywire Sema S2000 in person and it is glorious.  It’s amazing how much nicer it is in person compared to in pictures.  I spent a good amount of time looking over the fine details of this build since I’ve worked on a number of stock S2ks over the years and know when I see something not OEM under the hood…..


In pictures it does look strange with the really wide hips…..But in person it doesn’t look too drastic.  Who can say no to the Mugen SS Bumper… especially one that has been widened for extra smileys.


I’ve had numerous ITBs on my personal S2k, so this Kinsler unit with the top feed injectors definitely peaked my interest.  It’s interesting how Ryan integrated the DBW module and basically machined a shaft to match up with the Kinsler linkage.  I’m pretty sure he’s using a Subaru Drive by Wire throttle unit.  The way this was done, it could only be done with the Kinsler ITBs because the linkage is sideways compared to other itb setups….. Not the best explanation I know.


I love how extra plates with gussets were welded to the body to look super OEM.  The bung coming out of the brake master cylinder was interesting.  I really like this brake line look…. super tempted to do an ABS tuck….


really clean and tidy setup.


interior was very simple with a Mugen Gen III Steering wheel and JDM Recaro RSG.  Looks like a pretty beefy rollcage, but lets be honest, this car will never see a race track….


Interesting blend of the Mugen SS rear bumper and Mugen Ap1 rear trunk lip.  For me the side skirts make the car look really boxy and loses one of my favorite S2k lines.


Another SEMA heavy hitter, the Mode Parfume Ap1.  Mode Parfume is mainly known in the VIP crowd.  Mode Parfume brings an interesting look to the S2k, really rounds out the lines of the car.  Besides the kit this car is rocking a J’s Racing hood and Volk TE37.


The blue this car is painted is excellent.


Next to the mode parfum car was this J’s Racing Widebody Turbo’ed S2000, I follow the owner on instragram.  This looks like a very well executed build, with the power to match.  Love those Project Mu calipers and craftsquare mirrors.  Sometimes it drives me insane when there is a crazy widebody S2k, but is running a stock engine….. Wide body needs the power to match the looks!


nice and tidy turbo setup…. big ass turbo at that.


I saw this car for sale recently and it listed Tein Flex suspension on the car, details like this make me cringe, like seriously, you’re gonna spend 30k+ on body work alone and then you’re gonna get the cheapest jdm suspension you can buy…..  I was pleasantly surprised when I saw motons on the car.


Greddy showing off their Gen 2 Turbo Kit.  The only smog legal turbo kit for the s2000.  For the Gen 2 turbo kit, Greddy redesigned the exhaust manifold to make it much stronger, the older generation manifold was known to crack, in addition to the redesigned manifold, Greddy upgraded the turbo to a more modern Garret GTX2867R, oh yeah, Greddy ditched the super outdated eManage and now run Hondata flashpro.


I believe this car is actually owned by one of the owners of Evasive Motorsports.  Super clean build with voltex front end, volk te37, and project mu BBK.


I would love a 2nd s2k and boost the hell out of it.


Another shot of Gotuning tommy’s ASM’ed S2k running Titan7 wheels.


This booth stopped me in my tracks.  Nisin, in addition to making cup noodles (JK), they also make the OEM brake calipers and Spoon calipers!


Nisin had this on display.  It’s a 6 pot caliper they are planning to release soon.  They revealed to me that the new Spoon BBK is going to be based off of this caliper.  I can’t wait.


In addition to the BBK they are planning to release, they have performance brake pads available now!


All types of S2ks were present, including ones like this…..


I saw some random Japanese people at the Pit Garage booth…. later I found out it was the J’s Racing president…. oops, should of got him to sign something.


ICB selling high quality JDM goods in addition to the new Regamasters.  On the table we have a beautiful saclam exhaust.  For people that don’t know, the guy that runs Saclam is an ex-Mugen Engineer.  That’s why if you look at older mugen exhausts for 90’s Hondas, you can see the influence he had on the exhaust tips.


Interesting wrap color on this Type-R.



Pricing for the Regamaster Evos


I walked back to say goodbye to some S2k people.  I couldn’t help to notice Moses’s  Amuse Euro 70mm exhaust with some gold bling bling….


People were leaving, love all around….. refreshing from all the internal hate of car things in my heart (kidding not kidding)


Russan Hammer snapping a few shots for the gram.


Another shot of dimsum Jon’s car.


JDM umbrellas were out in full swing.


Moar of this.  I wish I framed this better.


stopped by to look at the finer details of this new Greddy kit!


Sara Choi’s S2000 CR I used to see rolling around in Monterey Park…. I like the Volk Te37 on this, really flows will the rest of the build’s dark accents.

Advertisements

Life: Eibach 2018 at AutoClub Speedway Part 2

Welcome to part 2 of my Eibach coverage. I’ve been overwhelmed by the positive response I received in the past few days, you guys are the reason that I keep taking photos, as crappy as they are, and continue to keep writing as horrible as my grammar is…..

I was blown away at the line up of S2ks.  It was like seeing an Instagram feed of S2ks in person.

Let’s start where we left off last post in Part 1


I wasn’t aware who this was in part 1, but my buddy let me know this is JDReyes


Voltex kit with ASM fenders, Spoon Hood, and White Volk CE28N…… all in Cocaine white.


Russian Hammer’s White ASM Ap2 with newly bronzed Volk CE28n again……


If there is one kit I’ve seen take over the S2k scene in the past few years, it’s the Voltex body kit.  It has really taken over in the past few years since Evasive first dropped the sketches to the public on FB years ago….  It’s a great looking kit, but to me it was destroyed by how many rep kits they are nowadays.  I do agree it is probably one of the most functional body kits since voltex did test it all in a wind tunnel.


Another voltex kitted S2k running Volk TE37SL with EVS fenders and an ASM hood with EVS hood vents.  Something about the vents on the fender reminds me of when Z3 fenders were super popular on imports, hell even my Honda Accord with a purple body kit had them back in the day.


Another angle.


Yep, Voltex is very popular.  Note the J’s Kitted S2k by S2Boost parting the sea of voltex


EVS fenders on this white Ap1 with a spoon hood and voltex front bumper by kaotik


side shot showing the red ce28n, voltex front flares, voltex sideskirts, circuit garage rear over fender, and craftsquare mirrors.


Silverstone Ap1 with voltex front bumper, spoon fenders, spoon hood, and craftsquare mirrors.


Hector Lavario’s Voltex kitted Ap2…..


All these S2ks looking super clean….. I’m not sure if it’s because i’m ADHD or jaded, but I miss seeing the variety of tuning styles in S2ks.  There are so many different manufactures of body parts for the S2k, maybe it is the effect of social media, but s2ks now are looking pretty similar following the same cookie cutter mentality, most S2ks run the same type of body kits or parts, like a voltex body kit, voltex wing, Amuse R1 Bumper (I’m guilty of this), CE28 or TE37….  Only 12+ years ago, I remember there was a variety of styles people were trying out, such as Tracy Sports, Amuse Wide body, INGS+1, Cwest, Car Garage Amis, Sorcery……  I can’t remember the last time someone actually brought up INGS+1 in a conversation,  I think it’s a great looking front bumper.


Voltex wings all around.


S2k row.


I think this is the first time I’ve seen car shop glow tail lights in person……. Digging the rear end of the Silverstone Ap1.  Voltex Swan Neck wing + CSG tail lights, K1 Laboratory Duck Tail, and what looks to be a J’s Racing Exahust.


Another shot showing the Volk ZE40.


I just realized that the sebring silver car to the left is rocking Euro headlight washers…. It’s funny how europeans can’t get rid of these fast enough, but on the other side of the ocean people are adding them to their cars.  The Volk TE37 fitment looks so period correct on this Ap1.


Next to the row of S2ks, they were a row of DC2, most of them being type-r…. Phoenix yellow is so good.


And Championship white.


relatively modest ap1….


I wonder if this spoon sticker is the reproduction or an original?  He’s also rocking a Spoon snorkle and J’s Racing cooling plate….


Another shot of Joe’s S2000 CR


I think Kaotik was explaining why he gold wrapped his Mugen intake something something…..


One of the few Turbo’ed S2ks in attendance S2boost.  It must be a SMOG thing, but they don’t have as many Forced Induction (FI) S2ks on the west coast compared to the east coast.  I remember a bunch of guys out east turboing their S2k when I lived there.


Joe’s S2k CR never ceases to amaze me…..

I’ll cut if off here.  I’ll post up part 3 soon which will complete my coverage of Eibach.  Once again, I must iterate that Eibach 2018 was a HUGEEEEE event.  I didn’t even get to see half of the event because of the utterly large amount of cars and decided to focus primarily on what I know, S2000s. Although I did own an EG civic at one point in my life and did preform a B16a swap on my friend’s EG, I will admit my knowledge in other Honda chassis is lacking.

Spotted: Authentic Parts J’s Racing S2000

Had sometime this week so I hung out at my buddy’s garage. A sweet Authentic parts J’s Racing build stopped by that is heavily tracked! Super refreshing to see a car with authentic parts get tracked here in the USA, something that is much more common place in Japan.

I had a sweet side shot, but I had my friend take the picture for me since I was holding my baby…. unfortunately it was out of focus haha……

J's Racing Themed S2000

What I saw when I rolled up. Those Takata Green CE28n are amazing on a white car. I think only white or yellow cars can pull of these wheels, but they definitely require an aggressive body to match.

J's Racing Themed S2000-7

Classic J’s kit. This is known as the “street version” not the crazy GT version that is even wider. In my mind, J’s Racing has three distinct bumpers, this one, the street version, the Ap1 half lip, and the crazy GT version that looks closer to the Amuse GT wide body. All the right parts here that I would imagine on an early J’s Touge monster clone. Waza sticker Check! J’s Hood Check! Craftsquare mirrors Check! The rock chips really show how this car is tracked and quite heavily.

J's Racing Themed S2000-8
The rear end, love how he put the stickers in the correct places to play homage to the JDM legend. Of course this wouldn’t be complete without the J’s wing! I am curious what type of trunk the car is running. The exhaust to me looks like one very dirty Amuse Exhaust!

J's Racing Themed S2000-4

Body is one thing, but details like this dry CF mugen hardtop really set this build apart in my head. Seriously, what type of person takes a $5k+ USD hardtop and tracks the hell out of it, especially with this SoCal Sun constantly beating down on it. I really think SoCal has the most Authentic Dry CF Mugen Hardtops of any region. I can think of 5 cars off of top of my head right now.

J's Racing Themed S2000-5

What you can’t see is the single Bride Zeta III Seat. Classic combo, the Momo Tuner wheel with an NSX-R horn button.t Interesting stack gauges! No carpet is so right, sometimes people just rip shit out and say ohhh “track car”, but I think it is just an excuse for a crappy build, this guy can legit say it since he has this super rad and authentic exterior to back it up.

J's Racing Themed S2000-6

Endless Calipers peeking out under those Takata Green CE28N! Do I have to say it again, I love authentic parts beaten to death! I know it seems counterintuitive, but it’s my kinda style somehow…. look I bought some super expensive stuff, now I’m gonna treat it like crap and let it wear!

J's Racing Themed S2000-9

At this point my friends were about to start working on the car. My baby was acting up, so I took my exit. Before I left I took a quick shot of the JRZ coilovers on the car, some $$$ stuff that is definitely used to their potential! Hopefully the owner can continue tearing up SoCal race tracks in this awesome car. Builds like this really bring me back to 2007ish when people bought these cars new and spent real $$$ on it and still tracked them. It’s rare to see builds like this nowadays.

Parts Review/ Life: MyAmuse in SoCal & Amuse Lug Nuts!

Hi all,
My friend Warren came out to SoCal to attend a wedding.  You can following him on instagram here .  He stayed at my place for a few days.  Of course he showed me his awesome and expensive Amuse Lug nuts.  

His Amuse R1 Bumper, Amuse Hood S2k!  Sometimes I see my own car when I see his….. RIP old S2k 😦

 


The first glance at the Amuse Titanium lug nut.  The lug nut is insanely light, even compared to the Volk Racing Lug nut.  It’s an open ended lug not, so you can run these with extended studs!


Yep, that is Chris’s Mugen S2k!  Bronze CE28N for days…..


Apparently it takes more than one person to install the Amuse Lug nuts!


Goes well together….


So Amuse lug nuts, are they worth the money?  They’re super light and have “good fitment” haha hopefully lug nuts should have good fitment.  I would say maybe?  They sure look great.

Life: Amusing Meeting

Happy Holidays and Happy New Years everyone. This past week we held a special meet for our friend Warren who came all the way from South Korea…. In addition to Warren’s arrival, we also had a secret santa swap.

Of course being car enthusiasts we all exchanged car related gifts….

DSC07307

Collin received an NSX-R GT poster, because he has a White NSX himself…. I received a small drone, sorry no pictures of it..

Amuse R1 S2000

It was the first time Warren got to drive his car with his Authentic Amuse Hood Painted. Warren lives in Korea and before he left he dropped his car off with the painter to get the hood painted. According to him, finding a painter that does a good job painting Dry Carbon is quite difficult, it looks like signature autobody did a good job…. Check out Warren’s Build here

DSC07312

This Authentic Amuse Bonnet Street version is insane, peep the quality. The hood is incredibly light I think it is even lighter than Chris Lum’s Mugen Dry CF hood. I find it interesting how the hood does not have a hole for the hood prop and the hood latch looks like an afterthought. I’m assuming the hoodlatch is like that because the race version is essentially the same top but minus the hood latch…Hopefully one day I can be baller enough to upgrade my FRP ASM hood to the CF version.

DSC07313
Of course to compliment his CF hood he also bought this Mugen Intake BRAND NEW! Don’t mind the dust, he just got back from his flight this day and drove it straight from the body shop.

DSC07318

The rear of his car got some love too with this -04 ASM rear bumper. I can’t imagine the money that was being spent, Amuse Bonnet, ASM rear Bumper, Mugen intake, and ASM 70mm SS all done within a month…..

DSC07316

His Brake setup is sweet too. Bronze CE28N + Stoptech Trophy Kit…..

DSC07320

More Brake + Wheel Pr0n

DSC07321

DSC07335

I got a better picture of Chris Lum’s Famous Mugen S2k this time since his car was not in the dark….

DSC07323

We did a quick shot of the different S2K hoods. My car on the left with the ASM bonnet, Mugen Bonnet in the Center, and Amuse Bonnet on the right. Everything is authentic, no Mugen-style here….We’re just missing J’s racing, veilside, and a few more I can’t think of.

DSC07324

A few more shots

DSC07325

DSC07331-HDR

I’ll leave off here with a picture of the squad. It’s crazy how 2015 played out…. I got my s2k back, I decided to move my ass to California on my own dime, met some awesome like minded enthusiast, and even had a few different jobs….. I’m sure 2016 is going to be even better!