Life: Eibach 2018 at AutoClub Speedway Part 3

Final post of Eibach 2018 at autoclub speedway! I’ve noticed something with my pictures I need to take more into account when I’m going over them….  My pictures look drastically different my iPhones (yes mine and my wife) compared to what I see on both my Mac Pro Desktop and Macbook even though I thought I calibrated them….

Check out my previous post here if you pissed it.

On to the pictures!  At this point I was done checking out the cars in S2k row and started to venture out to the vendor area.  An overcast arrived that was greatly welcomed, so being not so hot AF I really took my time…


Always a classic S2k look for me, Powerhouse Amuse R1 bumper and bronze wheels, in this case Mugen MF10 (I do wish they were CE28N) and a black OEM hardtop.  This white car was also rocking spoon aero mirrors…. I still don’t know how I feel about the aero mirrors since I’ve re-fell in love with stock mirrors recently haha.  I’ll probably change my mind about that in a few weeks, as I always do.


I do miss my Amue R1 bumper…..


This new gen NSX came fresh off the drag strip.  It ran a stupid fast time….I just can’t remember what it was…. thrilling I know.  I believe it only has exhaust modifications done to the car.


Not really a looker this one…. It would be a half decent build if it wasn’t for those awful headlights.  Some mods really detract from the car, for example, for me at least, anytime people add these headlights or tail lights I really lose my S2000 boner.  OEM is perfection.


This AP1 is packing an HKS super charger.  Probably spent all of his money on the HKS Super charger so he had to go for the eBay headlights……


It was the first time seeing the Rywire Sema S2000 in person and it is glorious.  It’s amazing how much nicer it is in person compared to in pictures.  I spent a good amount of time looking over the fine details of this build since I’ve worked on a number of stock S2ks over the years and know when I see something not OEM under the hood…..


In pictures it does look strange with the really wide hips…..But in person it doesn’t look too drastic.  Who can say no to the Mugen SS Bumper… especially one that has been widened for extra smileys.


I’ve had numerous ITBs on my personal S2k, so this Kinsler unit with the top feed injectors definitely peaked my interest.  It’s interesting how Ryan integrated the DBW module and basically machined a shaft to match up with the Kinsler linkage.  I’m pretty sure he’s using a Subaru Drive by Wire throttle unit.  The way this was done, it could only be done with the Kinsler ITBs because the linkage is sideways compared to other itb setups….. Not the best explanation I know.


I love how extra plates with gussets were welded to the body to look super OEM.  The bung coming out of the brake master cylinder was interesting.  I really like this brake line look…. super tempted to do an ABS tuck….


really clean and tidy setup.


interior was very simple with a Mugen Gen III Steering wheel and JDM Recaro RSG.  Looks like a pretty beefy rollcage, but lets be honest, this car will never see a race track….


Interesting blend of the Mugen SS rear bumper and Mugen Ap1 rear trunk lip.  For me the side skirts make the car look really boxy and loses one of my favorite S2k lines.


Another SEMA heavy hitter, the Mode Parfume Ap1.  Mode Parfume is mainly known in the VIP crowd.  Mode Parfume brings an interesting look to the S2k, really rounds out the lines of the car.  Besides the kit this car is rocking a J’s Racing hood and Volk TE37.


The blue this car is painted is excellent.


Next to the mode parfum car was this J’s Racing Widebody Turbo’ed S2000, I follow the owner on instragram.  This looks like a very well executed build, with the power to match.  Love those Project Mu calipers and craftsquare mirrors.  Sometimes it drives me insane when there is a crazy widebody S2k, but is running a stock engine….. Wide body needs the power to match the looks!


nice and tidy turbo setup…. big ass turbo at that.


I saw this car for sale recently and it listed Tein Flex suspension on the car, details like this make me cringe, like seriously, you’re gonna spend 30k+ on body work alone and then you’re gonna get the cheapest jdm suspension you can buy…..  I was pleasantly surprised when I saw motons on the car.


Greddy showing off their Gen 2 Turbo Kit.  The only smog legal turbo kit for the s2000.  For the Gen 2 turbo kit, Greddy redesigned the exhaust manifold to make it much stronger, the older generation manifold was known to crack, in addition to the redesigned manifold, Greddy upgraded the turbo to a more modern Garret GTX2867R, oh yeah, Greddy ditched the super outdated eManage and now run Hondata flashpro.


I believe this car is actually owned by one of the owners of Evasive Motorsports.  Super clean build with voltex front end, volk te37, and project mu BBK.


I would love a 2nd s2k and boost the hell out of it.


Another shot of Gotuning tommy’s ASM’ed S2k running Titan7 wheels.


This booth stopped me in my tracks.  Nisin, in addition to making cup noodles (JK), they also make the OEM brake calipers and Spoon calipers!


Nisin had this on display.  It’s a 6 pot caliper they are planning to release soon.  They revealed to me that the new Spoon BBK is going to be based off of this caliper.  I can’t wait.


In addition to the BBK they are planning to release, they have performance brake pads available now!


All types of S2ks were present, including ones like this…..


I saw some random Japanese people at the Pit Garage booth…. later I found out it was the J’s Racing president…. oops, should of got him to sign something.


ICB selling high quality JDM goods in addition to the new Regamasters.  On the table we have a beautiful saclam exhaust.  For people that don’t know, the guy that runs Saclam is an ex-Mugen Engineer.  That’s why if you look at older mugen exhausts for 90’s Hondas, you can see the influence he had on the exhaust tips.


Interesting wrap color on this Type-R.



Pricing for the Regamaster Evos


I walked back to say goodbye to some S2k people.  I couldn’t help to notice Moses’s  Amuse Euro 70mm exhaust with some gold bling bling….


People were leaving, love all around….. refreshing from all the internal hate of car things in my heart (kidding not kidding)


Russan Hammer snapping a few shots for the gram.


Another shot of dimsum Jon’s car.


JDM umbrellas were out in full swing.


Moar of this.  I wish I framed this better.


stopped by to look at the finer details of this new Greddy kit!


Sara Choi’s S2000 CR I used to see rolling around in Monterey Park…. I like the Volk Te37 on this, really flows will the rest of the build’s dark accents.

Advertisements

Life: Eibach 2018 at AutoClub Speedway Part 2

Welcome to part 2 of my Eibach coverage. I’ve been overwhelmed by the positive response I received in the past few days, you guys are the reason that I keep taking photos, as crappy as they are, and continue to keep writing as horrible as my grammar is…..

I was blown away at the line up of S2ks.  It was like seeing an Instagram feed of S2ks in person.

Let’s start where we left off last post in Part 1


I wasn’t aware who this was in part 1, but my buddy let me know this is JDReyes


Voltex kit with ASM fenders, Spoon Hood, and White Volk CE28N…… all in Cocaine white.


Russian Hammer’s White ASM Ap2 with newly bronzed Volk CE28n again……


If there is one kit I’ve seen take over the S2k scene in the past few years, it’s the Voltex body kit.  It has really taken over in the past few years since Evasive first dropped the sketches to the public on FB years ago….  It’s a great looking kit, but to me it was destroyed by how many rep kits they are nowadays.  I do agree it is probably one of the most functional body kits since voltex did test it all in a wind tunnel.


Another voltex kitted S2k running Volk TE37SL with EVS fenders and an ASM hood with EVS hood vents.  Something about the vents on the fender reminds me of when Z3 fenders were super popular on imports, hell even my Honda Accord with a purple body kit had them back in the day.


Another angle.


Yep, Voltex is very popular.  Note the J’s Kitted S2k by S2Boost parting the sea of voltex


EVS fenders on this white Ap1 with a spoon hood and voltex front bumper by kaotik


side shot showing the red ce28n, voltex front flares, voltex sideskirts, circuit garage rear over fender, and craftsquare mirrors.


Silverstone Ap1 with voltex front bumper, spoon fenders, spoon hood, and craftsquare mirrors.


Hector Lavario’s Voltex kitted Ap2…..


All these S2ks looking super clean….. I’m not sure if it’s because i’m ADHD or jaded, but I miss seeing the variety of tuning styles in S2ks.  There are so many different manufactures of body parts for the S2k, maybe it is the effect of social media, but s2ks now are looking pretty similar following the same cookie cutter mentality, most S2ks run the same type of body kits or parts, like a voltex body kit, voltex wing, Amuse R1 Bumper (I’m guilty of this), CE28 or TE37….  Only 12+ years ago, I remember there was a variety of styles people were trying out, such as Tracy Sports, Amuse Wide body, INGS+1, Cwest, Car Garage Amis, Sorcery……  I can’t remember the last time someone actually brought up INGS+1 in a conversation,  I think it’s a great looking front bumper.


Voltex wings all around.


S2k row.


I think this is the first time I’ve seen car shop glow tail lights in person……. Digging the rear end of the Silverstone Ap1.  Voltex Swan Neck wing + CSG tail lights, K1 Laboratory Duck Tail, and what looks to be a J’s Racing Exahust.


Another shot showing the Volk ZE40.


I just realized that the sebring silver car to the left is rocking Euro headlight washers…. It’s funny how europeans can’t get rid of these fast enough, but on the other side of the ocean people are adding them to their cars.  The Volk TE37 fitment looks so period correct on this Ap1.


Next to the row of S2ks, they were a row of DC2, most of them being type-r…. Phoenix yellow is so good.


And Championship white.


relatively modest ap1….


I wonder if this spoon sticker is the reproduction or an original?  He’s also rocking a Spoon snorkle and J’s Racing cooling plate….


Another shot of Joe’s S2000 CR


I think Kaotik was explaining why he gold wrapped his Mugen intake something something…..


One of the few Turbo’ed S2ks in attendance S2boost.  It must be a SMOG thing, but they don’t have as many Forced Induction (FI) S2ks on the west coast compared to the east coast.  I remember a bunch of guys out east turboing their S2k when I lived there.


Joe’s S2k CR never ceases to amaze me…..

I’ll cut if off here.  I’ll post up part 3 soon which will complete my coverage of Eibach.  Once again, I must iterate that Eibach 2018 was a HUGEEEEE event.  I didn’t even get to see half of the event because of the utterly large amount of cars and decided to focus primarily on what I know, S2000s. Although I did own an EG civic at one point in my life and did preform a B16a swap on my friend’s EG, I will admit my knowledge in other Honda chassis is lacking.

Finds: Eagle Shop Urawa S2000

It’s one of those nights were I can’t sleep…..  Lately I’ve been transition from one industry to another, so I’m trying to find a job in a different field than what I’ve been working on for the past 6 years.  I need to get my mind off of it, when my mind wanders, sometimes I look back to the early days of the s2000, when many things were new, and Japan was a bit further away since we didn’t have sites like speedhunters, or bloggers like Noriyaro (like bringing dajiban knowledge to the mainstream….), or even countless countless youtube videos of people visiting famed S2000 tuning shops while on vacation in Japan now.  The world really feels like a smaller place, globalization is real.  Back when the S2000 was released and your only glimpse of JDM culture was through Best Motoring Videos you had to buy (cough cough) or though magazines like Option, or my favorite, HyperREV!

Eagle Shop Urawa is just a typical Japanese tuning shop based out of the Saitama prefecture, right outside Tokyo, they specializing in Hondas.  They don’t produce their own parts, and seem more into the setup for cars for people that enjoy track days, which is why I’m sure the Eagle Shop Urawa Spec Road & Track Ohlins Dampers are available.  Eagle Shop Urawa generally use parts from the typical JDM s2k tuners, like Mugen, Spoon, Powerhouse Amuse, Endless, Voltex, you know the good stuff.  What really stood out to me is when I saw their blurb in the first HyperRev magazine they were featured in, the super rad speedster style S2000 caught my eye. The chopped off the windshield, gives the car a super raw look, almost retro-esque of some German or British stuff. No one else had such a crazy S2k at the time, the execution was spot on…. it could of gone bad, like really bad.

EagleShopUrawa
I love how it’s a single seater, the passenger side is blocked off.  Rocking some Enkei RPF1s, Powerhouse Amuse R1 front Bumper, Mugen hood, Bride racing Bucket seat, custom looking side skirts and APR mirrors

EagleShopUrawa2
The car attacking the track with a big ass voltex wing….

EagleShopUrawa3
The car is insane. The exhaust looks like an Amuse r1 Exhaust and the front bumpers it looks like they added some canards.  This car is really built for the track!

That’s it….. I know these pictures have been floating around the net for awhile now.  But I really wanted to spotlight one of my favorite JDM S2k builds.  If you have any more pictures of this car, please send them my way! I would definitely enjoy it.

Parts Review/ Life: MyAmuse in SoCal & Amuse Lug Nuts!

Hi all,
My friend Warren came out to SoCal to attend a wedding.  You can following him on instagram here .  He stayed at my place for a few days.  Of course he showed me his awesome and expensive Amuse Lug nuts.  

His Amuse R1 Bumper, Amuse Hood S2k!  Sometimes I see my own car when I see his….. RIP old S2k 😦

 


The first glance at the Amuse Titanium lug nut.  The lug nut is insanely light, even compared to the Volk Racing Lug nut.  It’s an open ended lug not, so you can run these with extended studs!


Yep, that is Chris’s Mugen S2k!  Bronze CE28N for days…..


Apparently it takes more than one person to install the Amuse Lug nuts!


Goes well together….


So Amuse lug nuts, are they worth the money?  They’re super light and have “good fitment” haha hopefully lug nuts should have good fitment.  I would say maybe?  They sure look great.