I’ve been having strange issues with my car recently. I was driving and the car seemed to be overheating and there was no pressure in the upper radiator hose. I tried bleeding the hell out of the system but it didn’t work. So once again, I canceled my very needed tune and brought my car back into my garage. I pulled the head off a couple of days ago and sent it to the machine shop to get resurfaced, even though it wasn’t warped too badly, still within spec, I just wanted to do it for good measure. My dad helped me install my Toda Valve springs I had. My oil pan is off, so I bought an oil pan baffle from alloy craft and will get that welded/installed shortly. I bought a mugen radiator cap and mugen thermostat for good measure, I’m still waiting on these parts to come in. I really wish the Jenvey units had a bleeder valve, it would make my life much easier. I am probably going to buy a Greddy radiator breather, which is essentially an external bleeder. So far if I quantify everything it is:
So as you can see the rough total is: 644.59
But since I already have the toda valve springs it is 226.59
Considering that I still have to get the baffle welded in, there are many other costs not reported here.