Life: 2017 Honda Civic Type R at Raceline USA

Recently a friend of mine, pro-racer clement, took delivery of his 2017 Honda Civic Type R. It is pretty amazing that Honda brought their Civic Type R to the US shores…. although we all wish they did it years earlier! Maybe because all the enthusiasts that wanted an EK9 CTR back in the day when they were new are actually old enough and at a point where they can afford a 2017 model. I might be in the minority here, but I think the car actually looks good….. It’s 2017, so it has to have 2017 type styling.  Everything nowadays is derived from aerodynamics, so modern cars do tend to have similar lines.

We put the car on the dyno at Raceline USA to see what numbers it puts out…. This is the first time I made a video really, so check it out!

Final results, 280Whp when the engine is cold! and 282Tq!!!! crazy numbers, this puts it over factory rating. But after the engine warmed up, the whp was around 267. There is power to be made with some tuning, as with all turbo’ed cars. Clement gave me a ride in this car around the block, and it feels pretty quick, power is very linear, reminds me power wise like a tuned twin scroll turbo WRX. The car felt like it handled well, probably because Clement is a super pro racer haha..

I can’t mention Raceline without this car.  Another Type R, the Integra Type R.  This car was actually in Hot Version American Touge 2.  I used to watch all of the Best Motoring International Videos growing up, American Touge was one of my favorite series, because it showed that American tuners can hang on with the JDM greats.

Haven’t taken car pictures in awhile….. so I forgot all about the polarizer.  I like the red stripe on the rim, reminds me of “Time attack Volks” from back in the day with red rings.  I love the massive Brembo calipers and LED headlights.  The car looks great in black.

No the lip is not real Carbon Fiber…..”It’s a Honda not a Mclaren” as Elton said to me.  I wonder what Mugen will do when they come out with a Kit, maybe make all these fake honeycomb grills real!?!?

Inside Clements Civic Type-R…….


Carbon fiber backed bucket seats!!! Although I heard this is faux Carbon Fiber also.  The buckets were thick and supportive.


True Asian style, he kept the plastic on the seats.


The Cluster is an LCD display.  I wonder how this will look 10-15 years later?  I prefer analog needles myself…. I even dislike the S2k cluster….. But having a single LCD display does make sense for packaging reasons, you can jam a lot more information on the screen.


Strapping the car on the dyno.


more faux grills


Dual exhaust tips with a 3rd tip for the wastegate dump!  Most likely taking inspiration from the Ferrari F40.


A quick peak under the triple exhaust


Amazes me how Elton has all this random JDM stuff all over. Like this ARC radiator! It looks S2k sized too!

I took a look outside…. This S2k Elton was working on caught my eye.  First thing I noticed were the J’s Racing exhausts that were mounted high.  Clement said this car has a J’s Kit on it usually.


Volk TE37SL and missing Over Fenders.


I couldn’t help to notice the crazy Twin Scroll Turbo setup.  I was told this car has a f24 stroker in it.

Twin Scroll Turbo setup with dump tubes probably sticking through the hood.


It looks like this is rocking a Full Race manifold and Fullblown intake manifold.  I don’t know too much about Turbo setups unfortunately…


Another interesting car I saw in the parking lot was this 240z….


Timeless looks…..

Parts Review: ASM Front Tower Bar

I’ve recently been unloading a bunch of my S2000 parts to clear out some garage space…..
I wanted to show off the ASM front strut bar….. it’s currently on the market to be sold, it’s on facebook and under the SoCal section on S2ki right now if you are interested.

For the non-enthusiast this is just an overpriced piece of metal.  All of the cheaper options such as the NRG, Megan Racing, etc are much much cheaper.  But they are all replications of this bar.  Each ASM front tower bar is made from one guy in Japan at Succeed Sports.  Read more about it here

When I got the bar, I was surprised how light the bar is and how solid it feels, it really feels like one piece of pipe.  Unfortunately I think this will get in the way of my Toda ITBs, oooppss did I say that?  My car is still in pieces so yeah….  hopefully s2k parts will still be affordable when I can put my car back together.

ASM front strut Bar
It’s the same concept as some expensive watches that are all made by one man that took years to learn his craft.  If this was a Porsche part it would be triple the price I bet!

ASM front strut Bar-3The welds are perfect, it’s amazing that this is done all by hand. You don’t get this with your Megan Racing knockoff! Those Chinese kids can’t come close.

ASM front strut Bar-2
As quoted from Gotuning, “They’re not simply color treated for show. The entire manufacturing process of each bar takes 4 hours so only 2 can be produced per day. Many ASM GT series bars hold design patents to protect their innovative designs.”

ASM front strut Bar-4
I’m a proud owner of this part, I hope it will go on to a good home in the near future. I wish I could tell you how this feels on a car….

Support Local Businesses Gotuning, the Only ASM distributor on the USA!

Tech/Parts Review: S2000 TRD Door Stabilizer.

I’m a big JDM fanboi, nothing new about that.  Being the JDM fanboy I am, I’m constantly searching  the web for new JDM tuning developments regarding the S2000.  I’ve looked through my HyperRev issues front to back more times than I can remember.  I couldn’t help to notice that many JDM tuners use parts that we, the USDM tuning scene, simply haven’t thought of yet.  Such as racing sized AC condensers that Stradale uses, which are half sized AC condensers so the radiator can receive better cooling while driving. A few USDM tuners take these “unheard of” JDM ideas are turn them into “original ideas” *ahem ahem *Ballade Sports *SakeBomb Garage… yeah those Ohlins lower perches or RX8 rear calipers are real original ideas dudes……

An item of tuning I noticed that a few JDM tuners are implementing is the TRD Door stabilizers retrofitted to work with the Honda S2000.  TRD, is obviously a Toyota branch (some would say the Mugen of Toyota (kidding not kidding)), so this is made for Toyota models like the BRZ/FRS/GT86.  This one in particular is the one not made for the BRZ but for every other Toyota model such as the Altezza, Celica, AE86….. model number MS304-00001. This would actually fit my Lexus LS430 daily driver.


All the way from Toyota Technocraft!


Unboxing of the TRD door stabilizers

All laid out….. On a Toyota/Lexus vehicle, all you have to do is bolt in and you’re off to the races…..

There are many ways of mounting the TRD Door Stabilizers to the S2000. I personally went with the CSOhara kit, or Creative Service Ohara. I found their products listed in my Hyper Rev Magazine and checked out their website. I used an importer to import me the kit. The Kit comes with instructions completely in Japanese. My Japanese is horrible, but it comes with pictures and you can find walkthroughs of people installing the kit on Minkara. I added links on the bottom of the page if you wanted to see how other people installed the door stabilizers not using the CSO bracket.


The instructions……

What the CSO kit comes with, two brackets, some allen head bolts, rivets, and stickers to cover the holes.  I think why there is coins taped to the paper is because my importer overpaid, and they are giving me the difference.

To prep everything, remove the OEM S2k door hinge.  Unscrew the pillips head bolts attaching the OEM bracket, use an impact screw driver since those puppies are on tight! A few whacks and I was able to get this off, it would definitely suck to strip those phillips head screws!


Close look at the TRD stabilizer kit.

The brackets….


First, you have to smash the raised portion of bolt hole on the TRD door stabilizer bracket, you want to make this as flush as possible.



Next you rivet the TRD door stabilizer bracket into the bracket from CSOhara.

After you rivet the bracket on, you have to flip it around and grind down the rivet so it is flush with the CSOhara bracket since this sits flush on your door.

Test mount!

Bolt in the CSOhara bracket to the S2000 Door with the supplied allen Head bolts…..



Attach the stickers  to cover up the bolt holes and slide on the plastic TRD door stabilizer pieces. Should look something like this when installed, I didn’t put the stickers on to cover the bolt holes.

Screw in the TRD Door stabilizer on the chassis side using the OEM honda screws.

Close the door and pray!  For some reason I was able to get the passenger side of my car to be flush, while the driver’s side intrudes a bit.  I might be because my car was involved in a hit and run on that driver’s side years ago….. After the install I notice my doors have a much louder thunk when shutting the door than before, a much more solid feeling.  As of driving dynamics wise, I feel that the car is stiffer, but it could all be in my head…..


The last picture I have of my S2k before it was parted out….. The best things about cars is that you can always come back…. maybe one day.  Sooner than later

Checkout these links of people on Mikara that installed the TRD door stabilizers on their S2000!

http://minkara.carview.co.jp/userid/2159608/car/1661832/3115806/note.aspx

http://minkara.carview.co.jp/userid/306830/car/200949/3091767/note.aspx

http://minkara.carview.co.jp/userid/1278993/car/942593/6990829/parts.aspx

http://minkara.carview.co.jp/userid/611808/car/1232388/3086656/note.aspx

 

PickUps/Parts Review: TODA RACING 60-70MM CATALYST ADAPTER (TestPipe)

I got some parts reviews I’ve been meaning to put up…. Since I have an ASM 70mm Titanium exhaust (Which I believe is the best S2k exhaust ever, much better than the SS version, the sound is so crisp!), I’ve always ran it with an invidia 70mm testpipe which is 70mm straight through, for what that is, the Invidia unit is a great value for what it is and fitment is spot on. This Toda Racing 60-70MM CATALYST ADAPTER, makes perfect sense to me, smooth transitions should mean higher exhaust velocities right?  I’m not an engineer, but it makes me feel better because it says Toda racing and has a sticker for RACING USE ONLY 

Toda Test Pipe-2I’m a huge fan of Toda Racing.  It seems like every Honda shop uses their products to build their engines, including the world famous KTECH….. and they run engines in Super GT…. How cool is that!

Toda Test Pipe
Of course another shoutout to RHDJapan some of the beautiful benefits of globalization….

Toda Test Pipe-4Quick peek inside….

Toda Test Pipe-3A good look at the transition….

Toda Test Pipe-6side by side shot with the harbor freight jack

Toda Test Pipe-5

Toda Test Pipe-7Absolutely beautiful….

Toda Test Pipe-8
Welds for days.

Toda Test Pipe-9

Toda Test Pipe-10

Toda Test Pipe-11

Toda Test Pipe-12I love how this comes with an OEM Quality Gasket.

Toda Test Pipe-13Bolted on the car….

Toda Test Pipe-14Mated with the ASM 70 MM Titanium Exhaust……

Toda Test Pipe-15
The only thing that would complete this would be an ASM or Toda Exhaust Manifold….. If only…..

Toda Test Pipe-16

After installing this on the car, the car was noticeably quieter on pulls.  I would assume this is because the air is moving faster now since it has a smoother transition, while before it was a 60mm exit on the header dumped directly into 70mm test pipe.  Honestly the car felt the same powerwise.

Life: S2k Cruise in San Diego

Just because I don’t “have” an S2000 does not mean this is not S2kandTheAnt…. I lent my camera to my friend Alvin to take some pictures of an S2k cruise a few Sundays ago. The cruise was through the very scenic mountains in the San Diego area. For those not from LA, San Diego is about an 1hr+ away from where we live, sometimes longer because, you know…..LA traffic. It’s a real thing, trust me. He snapped a bunch of pictures…. of rad cars in attendance.

03-26-2017_Cruise-2Not only were S2ks on the trip, but a few NSXs decided to swing by….


This NSX looked really fresh…interesting bling bling wheels.


Clean execution of an New Formula Red S2k, Ap2 lip, ZE40, Stoptech Calipers, and an OEM hardtop.


I could do a “yo dog” joke here, but interesting s2k air freshener.


Long Beach Blue NA2 NSX.  Whenever I think of a USDM spec NA2 NSX, I think of this color… There used to be one around my neighborhood growing up, it was probably brand new then.


Some cars definitely made the hike out to the cruise, This particular car came from Utah, while the first NSX came from Arizona.


This yellow NA1 Looekd pretty cool.  It was the most modified NSX in attendance.


I’m loving the OZ superleggeras on this car.  I used to have these rims on my Wife’s GC8…. 2.5 RS yo!


The sky was incredibly clear this day


Personalized license plates were out in full force.


Another shot of the NA1 NSX with some custom LED turn signals.


Since my friend has a Laguna Blue S2k, it was interesting to see the differences of color between the Long Beach Blue and Laguna Blue. Laguna blue seems to be a bit lighter.


An Evo 8 was in attendance. I’ve always wanted an Evo…..


They stopped by Alberto’s Taco Shop…. Alvin didn’t partake, because he had a long drive home…..


These yellow flowers were everywhere. They looked like dandelions.


A closer look at the NA1 Yellow NSX. Some LED tail lights to go with the GT wing.


Comptech/CT Engineering SuperCharger.


Interesting Strut brace, must be a reason it is designed like this.


Group shot!





Alvin’s LGBTQ, I mean LBP Ap2. On some Sticky Michelin Pilot Super Sports……







Final stop was this Pie Shop.




Alvin said the Pie was awesome….



I’ll try to have more posts up before I go back into full study mode….  Shoutout to Murphy for making this all possible!

Parts Review/ Life: MyAmuse in SoCal & Amuse Lug Nuts!

Hi all,
My friend Warren came out to SoCal to attend a wedding.  You can following him on instagram here .  He stayed at my place for a few days.  Of course he showed me his awesome and expensive Amuse Lug nuts.  

His Amuse R1 Bumper, Amuse Hood S2k!  Sometimes I see my own car when I see his….. RIP old S2k 😦

 


The first glance at the Amuse Titanium lug nut.  The lug nut is insanely light, even compared to the Volk Racing Lug nut.  It’s an open ended lug not, so you can run these with extended studs!


Yep, that is Chris’s Mugen S2k!  Bronze CE28N for days…..


Apparently it takes more than one person to install the Amuse Lug nuts!


Goes well together….


So Amuse lug nuts, are they worth the money?  They’re super light and have “good fitment” haha hopefully lug nuts should have good fitment.  I would say maybe?  They sure look great.

Parts Review: CAR GARAGE AMIS MUGEN AIR CLEANER DUCT COVER – CARBON

First post of the year 2017!  So…. lots of things have happened.  Long story short, the S2k is gone, I had to sell the car whole, it wasn’t for money reasons, but I had to let it go quick.  I sold it to a friend and the car has been parted out…. I’m sure my parts are floating out there on a bunch of S2ks out there!  No worries, it’s just a car afterall….

Another life change, I quit my job and I’m studying to do a different field of work.  I’ve been doing that for the past 2 months or so….

Let’s get back on topic.  Everyone knows that the Mugen intake for the S2k requires you to cut up your Hood to fit unless you have an ASM, J’s, Mugen, or Spoon hood.  *Sidenote, I hear that the spoon hood still rubs with the Mugen intake…..

The problem is, after you cut up your hood, there is a nasty ugly hole in your hood.  JDM Tuner, Car Garage Amis rectifies this problem with their MUGEN AIR CLEANER DUCT COVER.  I haven’t seen any real pictures of this besides the stock one on the Car Garage Amis website, which happens to be the smallest picture ever!

Luckily my friend Kevin bought a Mugen intake and the Car Garage Amis MUGEN AIR CLEANER DUCT COVER from RHDjapan! I swear they should sponsor me.  He sent me a few pictures of him installing it…..


Kevin already went ahead and installed his new Mugen Intake.  I’ll post a DIY on how to do that in the future….


The most ass clenching moment of the entire install.  The Car Garage Amis instructions they send you give you a rough guideline of where to cut and is entirely in Japanese.  Luckily my friend Kevin has some Japanese colleagues that helped him translate this document to further clarify.  Kevin made a rough guideline on where to cut and made a careful incision with his dremel after blue taping it all up.

After cutting, Kevin made sure the Cover fit.  Here is a rough mockup of it on his car.


Everything is coming back together!

The next day Kevin stopped by my place so I could take a look at everything.  As expected, the fitment was spot on.  I took a couple of snaps…


It’s so beautiful, if I had to cut my hood for a Mugen intake I would definitely get this piece.  It really cleans up the engine bay.


It almost looks factory the way it contours around all the nooks and crannies.


One last look at the MUGEN AIR CLEANER DUCT COVER…


Full frontal shot.  He went with the ASM cooling plate in addition to his Mugen Intake.


Another shot of his Mugen intake…. and his dress up bolts.


One of the few people with the Gotuning/Greddy Spectrum Elite Exhaust for the S2000.  I remember when these first came out years ago…… The single version has been since discontinued.

Life: The Chronicles Year 8

Hey all,

I’m finally finishing catching up the events I went to a few months ago.  This should be the last of the posts for now…..I wanted to go to the Chronicles Year 8 meet for awhile now.  Reading about them on Joey’s blog when I was living on the East coast, it always painted me a good picture of the SoCal car scene.  I knew I couldn’t miss out this year, it helps to have car friends to go with too.


This meet just so happens to be when I was in the process of moving to my new place.  I had a bunch of stuff to move and only a few days to do it….. My wife was exciting to hear I was going to a car meet instead 🙂


I met up with a few friends in Pasadena before heading out to year 8.  Chilling in front of the infamous rival machine.

Gabe’s car just came out of the paint a few days prior…. The car is looking minty fresh with the battlecraft hood.


Joe was ready to lead the way.  Those MF10s are looking dangerously close to the curb in this picture… You can remember Joe’s car from this post

October 29, 2016-DSC02355
Following Joe to the meet.

October 29, 2016-DSC02358
My buddy Alvin snapped some shots on the road…..Endless brakes look so good with the Bronze Mugen MF10 rims.


Mugen hood, CR lip, works surprisingly well.

October 29, 2016-DSC02361
Some shots of the Rival Machine.

October 29, 2016-DSC02370
Alvin took a shot of me in traffic…..

October 29, 2016-DSC02373
We’re almost there…..


Of course, this being S2kandTheAnt….I met up with Areen and Chris….. they don’t need any introductions.


interesting pinstriping on the Enkei NT03 on the Rival Machine


626 Squad.


another angle of the 626 squad.


Spoon’s newly converted center-drive FD2 Honda Civic Type R was in attendance.  I even got to sit in it! In another life, this used to be 5Zigen’s FD2R in Japan.

S2k squad represent.

It was a hot hot hot day, I think it was close to 100 degrees this day, the crazy heat forced me to buy a spoon umbrella……yeah forced……


I thought these 24k gold engine bays have gone out of style, but it looks like it is still around.


Can’t get enough of this lineup…..


Cool styled NSX.


I loved this mugen kited DC2 Type R.


the Bronze Mugen MF10 looks great against the white.


The same Spoon Civic EG that was in my Spoon sports post.  Clean as always, rocking almost the catalog of spoon parts, but that damn Mishimoto radiator always gets me!  Link for the owner if he ever reads this.


I haven’t seen this in years, an Ap1 veilside lip.


Another picture of the S2000 Veilside lip.


This Mugen themed FD2 converted Civic looked great.


the only Evo ix at the show and it was a great example of one.


Rare Mugen FA5.  True story, I remember going to a dealership in 2009 and the salesman tried to sell me this car instead of the 2009 s2k I was looking at, he was working really hard at it, these cars must have been a hard sale at the time, no real power improvements that make a car cost $6k more….but now in hindsight, it might of been a good decision….


CDM as in Canadian Domestic Market Acura CSX…. with a supercharger and Itasha livery.


PY Integra Type R.


Hector Lavario‘s Voltex Theme S2k was looking good!


Either this in an imported car or a very authentic representation of an early D1 drift car.  I love the look, very nostalgic.


Chris popped his hood, and I couldn’t help  but to snap a picture.  Mugen intakes are my favorite…..


behind me was this swan-necked Suzuka blue s2k.


Rocking Voltex Styled Aero!  Overall this was well executed.  The red car next to this car was actually K swapped using Hasport mounts…. Update 4-10-2017….. this car was on a Smoking Tire One Take


A few Porches were in attendance.


ASM styled car with M racing mirrors.

And this closes it, from the garage, back to the garage…

Life: JCCS Neo Classics 2016

Super Picture heavy post! I finally had some time to go through the pictures. I’m a big fan of JCCS Neo Classics, it’s the first real show I went to when after I moved to SoCal. Last year was a treat, this year was just as good.  I missed out on the normal JCCS this year because I was invited by my friend to the filming of The Grand Tour, I was in the crowd in the opening scene in the first episode.


I rolled with my buddy Chris with his Speedhunters famous k20R Swapped Lotus Elise/Exige.  Speedhunters story here.


Japanese cars from the 90s are finally eligible for importation, we can expect to see more and more cool jdm cars stateside.  This yellow car has a liter bike engine…. I can’t remember which one…


Looking good on these TE37


They were a few NSX in attendance, they were all mildly modded.


My friend EJ brought out his Type-R themed Ap1 with a SOS Supercharger


Datsun 240z were properly represented.


Particularly from this group, M’s Factory.


Next to this rad Toyota Crown, they were giving out free PRETZ! I may of took a box…. or two…. or three?


SW20


Edited this in a way that looks like it came out of a Haynes Manual.


Interesting upholstered Dash in this MR2


Most of these old Toyotas were rocking a 1JZ or 2JZ.


Shakotan Style Hakosuka.


Hand Crank?


This dog was sitting in the car all day.


Best kids car ever….. Calsonic R34 GTR.


I was really feeling this Cressida.  It had me checking craigslist for a few days for a cheap example.


I love the Nismo Rims and Nissan calipers on it….


The pink one next to it was equally rad


I love how boxy these cars are…..Work CR Kai are a nice touch.


2JZGTE swapped!


Some clean RA1 Honda Odysseys showed up.


looks like an H23 Vtec Swap


checked out a few Hondas…..


the showing of the Hondas were Okay…. I would come here for the non H badge cars……


The Parking lot was another show.  Like the row of Skylines, including this R33.


R32 GTR on dealer tags, only of the few ways to get them CA legal…..


I’ve seen this R33 GTR at a few meets now.


Row of Skylines GTR, it is missing the Nissan Stagea that I saw roll out…… Is this really the parking lot?


R34 Skyline GTR in Midnight Purple, a damn rare color.


Family shot


Clean NSX with ZE40s up front and TE37 in the rear.


Nice seeing this roundie BMW 2002


I always loved the styling of these cars.


Some guy showing off his bosozoku style bike on the bed of his truck…..


some Rotary machines and S chassis action


I’ve seen this Itasha 240sx around Torrance…..


Soarer with interesting automated folding roof.


Patina


G Nose 240z


Super clean engine bay of this white 240z.


Probably the cleanest  Datsun 240z at the show and on Watanabes!


The interior was redone in blue!


Another 240z with an interesting exhaust.


Lancer Turbo with the Tuned by AMG spark plug cover


Mitsubishi Lancer turbo!


Famous Toyota Supra with ITBs


We decided to check out the Toyota Museum


Factory Fresh Lexus ISF


Is430.  A project between Stillen and Chip Foose made for SEMA,  you can check out the youtube video here


a 3UZ-FE stuffed into an IS300 with Tein Coilovers with EDFC.



Two tone black and red paint job….


They had a few concept cars laying around. I think these are concept cars for the Lexus SC300.


TRD supercharger!


Crazy turbo setup on this Toyota Celica


Factory Fresh Is300


They had a few Toyota 2000gt on display.


This is a super rare LHD model.  Crazy how this is not roped off.


They even had an engine on display


Factory Fresh AE86 Corolla GTS


I’ve never seen one so mint up close


Minty stock Supra


AW11 with plates.  this must be an employee car


The FRS prototype from a few years back.

Life: The day I meet Ichishima San! at Spoon Sports USA

Being in Southern California and being a car enthusiast is awesome! I can’t say that enough, I can see how you can eventually become jaded from the car overload…. I’ve been cutting down on car events to keep things fresh and we just bought a house, so we’ve been busy fixing it up. When I heard Ichishima san, the SPOON Sports CEO was going to be at GoTuning, aka Spoon Sports USA, I knew I couldn’t miss it. I’m not the biggest spoon fan, but I respect their philosophy, a minimal approach to car tuning, just slightly augmenting the factory fundamentals to retain total balance over outright power…..


The event was posted all over social media, Upon arrival at GoTuning, Ichishima was not there yet, but people were still rolling in, like this EK.  I’ve always like the body style of the EK. I remember a few years ago, my dad had an EG, EK, and EF at the same time, all hatchbacks.  He let me choose one for a daily driver, in the end I picked the EG since it was the most raw with a stick shift, hand crank windows, and no moonroof, and the EF was auto 😦


This brought out a lot of Spoon fans.  Like this beautiful Spoon’ed out EG.  He had almost the entire spoon catalogue on his car, but the damn Mishimoto radiator keep bothering me…….I love the blue and black theme.


Beautifully executed.


More cool cars were rolling in, like this Mugen themed EP3 with MF10s…. funny thing about MF10s, KingMotorsports just released a re-run of Mugen MF10 yesterday, everyone and their mother has been trying to sell their used set, probably hoping to buy a brand new in box set.  King lets you buy per wheels so those guys that bought 2 sets of NSX fitment wheels for the rear wheels for over $7k+ definitely got screwed!  I think the group buy is over now……..too rich for my blood.


Hector Lavario’s Voltex themed S2k with quality authentic parts.  I really like the Volk TE37s, beats the NT03s he had before!


Took a closer look at the EP3 running the Mugen kit.  Bronze MF10s on a silver car looks so right.


I like seeing properly modded EP3s, this chassis hasn’t seen too much love over the years compared to the other models.


MF10s with EP3 Type R Calipers.


My S2k…. got all sorts of cracks on my bumper and my hardtop is in horrible shape………Anyone want to sell me a daily?


Beautifully restored EG Civic.  I love color and the red anodizing on the CE28Ns.  I overheard heard the owner talk how almost every piece on the car is new….. like a modern day restomod.


Same ITR I shot at Tech Day awhile back….. He has an instagram too, I can’t remember it off the top of my head right now…….


Some of the GoTuning Featured line up.  Their famous center-drive Super lap battle FD2, full Spoon Ver.2 demo car with prototype Spoon open air concept hardtop, GoTuning Tommy’s ASM s2k, and of course Chris Lum’s famous Mugen Ap2.


Not in the same parking lot in front of GoTuning, I found this BB6 Prelude in the same complex.  The driver’s side door was bashed in.  This car definitely has some goodies though.  JDM full red interior, HID retrofits, JDM fogs, OEM lip kit, and running TL rims!  I used to have a 5th Gen BB6 back in the day.


The Calipers look like they’re off of another model, possibly late gen Accord?


Another angle of the featured GoTuning Lineup.


I know this has been around, but it was my first time seeing this in person. What is insane about the Spoon prototype hardtop is that the entire metal piece is CNC machined out of a single block.


Areen living up the Spoon life.


At this point Ichishima san rolled up in this BMW M5, Areen is hard at work assisting Ichishima San.


Not only does he have a sick Spoon/ASM themed S2k, he’s also really good at carrying stuff.


Ichishima San arrived and got to work.  Here he is signing Hector’s car.


Checking out the Spoon themed EG Civic.


Here is when he shook the steering wheel of the Spoon themed EG civic.  He remarked how loose the steering wheel is!  He mentioned that this is incredibly unsafe.  He went around that entire day shaking everyone’s steering wheel, including mine 🙂

November 19, 2016-IMG_0902
Chris getting his Spoon Steering wheel signed.

November 19, 2016-IMG_0906Chris’s all Mugen car.  I mentioned the car is all Mugen, and he said,  “he loves all Hondas!”


Checking out the EG civic and showing the owner of pictures of his own personal cars…… Nice Jordan IIIs btw….


People were trying to get everything signed this day.  I saw the most Spoon clusters Brand new in Box I’ve ever seen in my entire life getting signed, it’s crazy how much they go for nowadays…..

Next four pictures are shot by my buddy and talented photographer Nick aka NH512

NH1_4378

Myself, Ichishima, and Areen.

NH1_4391

I requested to sign my Spoon rear view mirror, inside of my hardtop, and an S2k Spoon Spark Plug cover.

NH1_4393

Ichishima san and I…. I didn’t know what to do with my arm here…..

NH1_4458

Closing it out with this picture….here I was getting ready to yell at Ichishima san for leaning on my friend’s car…..